685865
25
Zoom out
Zoom in
Previous page
1/36
Next page
23
Programmable Sensor Override
The X-Core
allows the user to program the controller so that the
sensor disables watering on only desired stations. For example, patio
gardens that have pots under overhangs and roofs may not receive
water when it rains and will continue to need to be watered during
periods of rain. To program sensor override:
1. Turn the dial to the RUN position.
2. Press and hold the button down while turning the
dial to START TIMES position.
3. Release the
button. At this point, the display will
show the station number, ON, and the
icon, will
be ashing.
4. Press the
or button to enable or
disable the sensor for the station shown.
ON = Sensor enabled
(will suspend irrigation)
OFF = Sensor disabled (will allow watering)
5. Use the
or buttons to scroll to the next
station that you would like to program the
sensor override.
NOTE: The controller default is for the sensor to
disable watering on all zones when rain occurs.
When the X-Core receives an input from the sensor to disable
watering, the display will indicate those stations that have been
programmed to override the sensor. A station that is running in
the sensor override mode will ash the and icons alternately.
Test Program of All Stations
The X-Core allows the user a simplied method for running a test
program. This feature will operate each station in numerical sequence,
from the lowest to the highest.
1. With the dial in the RUN position, press and hold the
button. The station number will be displayed and the time will be
ashing.
2. Use the
or buttons to set the run time from 1 to 15
minutes. The run time needs to be entered only once.
3. Aer a 2 second pause, the test program will start.
Hunter Quick Check™ Diagnostics
This feature allows you to quickly diagnose wiring problems with
your controller. Instead of having to check each eld wiring circuit for
potential problems, you can use the Hunter Quick Check circuit test
procedure. To initiate the Quick Check test procedure:
1. Press the
, , , and buttons simultaneously. In the standby
mode, the LCD will display all segments.
2. Press the
button once to begin the Quick Check procedure.
Within seconds, the system searches all stations for detecting any
circuit problems. When a eld wiring short is detected, an ERR
symbol preceded by the station number will momentarily ash on
the display. Aer the Quick Check completes running the circuit
diagnostic procedure, the controller returns to the automatic wa
-
tering mode.
RUN
Sensor Enable
Sensor Disabled
ADVANCED FEATURES
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hunter X-Core at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hunter X-Core in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hunter X-Core

Hunter X-Core User Manual - German - 36 pages

Hunter X-Core User Manual - Dutch - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info