685907
76
Zoom out
Zoom in
Previous page
1/100
Next page
69
MAKING ADJUSTMENTS
After programming the Solar Sync module and your
controller, allow the system to operate for 3 days to gather
sun and temperature data.
Observe the S-Sync Adjust value on the controller
display. If the amount seems to be lower or higher
than expected for the time of year, use the Water
Adjustment feature to correct.
If necessary, the watering may be increased or
decreased with the Water Adjustment factor. Only
change the Region setting if you run out of adjustment
range within your selected region. The Region setting
adjusts sensitivity to weather change, and may have
unexpected results.
INCREASE OR DECREASE WATERING
Turn the dial to the Advanced Features dial position.
Select ET Functions.
Select Solar Sync Setup.
Use the down arrow to select the Water Adj. setting,
and use the + or – buttons to change the factor up or
down.
Notice that as the Water Adjustment factor is changed,
the current S-Sync Adjust amount at the top of the
screen is changed. This can help you predict how
much more or less watering will occur, as a result of
the change (the actual minutes can also be seen at the
Set Station Run Times dial position, after adjustment).
When adjustment is complete, return the dial to the
Run position.
CHECK RUN TIMES
After adjusting the Water Adjustment factor, you can turn
the dial to the Set Station Run Times to see the effects of
the change, in minutes (or gallons or liters, if flow has
been learned for the station).
Select a station in an adjusted program. The screen
will show the Programmed run time, meaning
the original run time, and “Actual. The Actual run
time is what will actually run with the effects of the
Solar-Sync adjustment.
If the controller has learned flow by station, press and
hold the Information button, to view the estimated
water usage (in gallons or liters) after the effects of
the change.
Run times occurring after midnight may be slightly
different, since the next adjustment for todays ET will
occur at midnight.
NOTE: Set station run times for peak summer watering,
with seasonal adjust set at 100%
TRACKING THE ADJUSTMENT HISTORY (CONTROLLER
LOG)
It is possible to review the adjustments the controller
has been making.
Turn the dial to the Data History dial position.
Use the arrow buttons to select the Controller Logs,
and press the + button.
The Controller Log displays significant events at the
controller that are not alarms (alarms are tracked
separately, in the Alarm Log). Every change to
Seasonal Adjustment occurs approximately 2 seconds
before midnight, and each change is recorded in the
log.
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hunter ACC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hunter ACC in the language / languages: English as an attachment in your email.

The manual is 7,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hunter ACC

Hunter ACC User Manual - German - 108 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info