Manual Hunter ACC (page 25 of 100) (English)

685907

Zoom out

Zoom in

1/100

For experienced operators, the fastest steps to initial

programming are as follows.

1. Set Current Date/Time: Use the arrow buttons to

navigate, and the +/- buttons to change. Set the Date

and Time and choose Units of Measure.

2. Set Watering Start Time: Each automatic Program

has 10 start times. At this position, use the

Programs button to select individual programs,

and the 10 possible start times for that program will

appear. Use arrows to navigate and +/- to change

See SETTING PROGRAM OVERLAP OPTIONS on

page 36 for more information..

3. Set Station Run Times: At this dial position, use

the Programs button to select the program you are

setting up. Then, use the +/- buttons to change the

hours:minutes:seconds run time for each station.

Use the up and down arrows to move to the next

station. TIP: Use the Copy and Paste buttons to move

quickly through large numbers of similar stations.

Set the first station’s run time, then press Copy. Use

the Up arrow to move to the next station, and press

Paste.

4. Set Days to Water: Use the Programs button to

select the Program. Use the arrows to move to Day

Sched, and choose Schedule Type (Day of Week,

Interval, or Odd/Even).

5. Set Pump Operation (optional): The two Pump/

Master Valve outputs may be set by station at this

position. If no pump or Master Valve is in use, this is

not required.

CELLULAR/GSM (ACC-COM-GSM, GSM-E)

GSM cellular service must have reliable coverage at

installed site.

GSM service must permit and provide Circuit Switched

Data (CSD). IMMS 2.0 connections require CSD and will

use the Data telephone number. No other form of cellular

communications will work. There are no CDMA options for

ACC communications at this time.

UHF RADIO

All UHF radio communications require a license.

All radio communications for ACC work with RAD3 radio

module or later. IMMSR radios, designed for original

IMMS Site Interfaces and Controller Interfaces, will NOT

work with ACC controllers.

poWer faIlures ........................................................................

The ACC’s real time clock is independent of external power

or the 9 VDC battery, and will keep time during a power

failure of virtually any length. When external power is

restored, the ACC will still have the correct time and will

be ready to irrigate.

QuICK sTarT ................................................................................

A Power Outage message will be stored in the Alarm Log,

with time of the outage. Another log is stored when power

is restored.

RAD3 radios are not supplied with antennas, but an

antenna must be provided for the radio to operate, and the

antenna must be installed outside of any metal enclosure

(including the ACC metal cabinet).

Radio communications for the ACC are only to

communicate with other ACCs, and do not provide

communications directly with a central computer. This

should be established with an IMMS-CCC and a hardwire

interface, or by telephone using ACC-COM-POTS or

ACC-COM-GSM (or GSM-E for international applications).

For golf applications using Surveyopr central control

software only, the AGCHUBR provides a direct radio

interface to all radio-equipped ACC/AGC controllers.

See Hunter’s ACC System Design Guide for important

details regarding design of central control systems.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hunter ACC in the language / languages: English as an attachment in your email.

The manual is 7,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hunter ACC

Hunter ACC User Manual - German - 108 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hunter ACC Manual

Product: