604917
29
Zoom out
Zoom in
Previous page
1/40
Next page
AU29
Installation
You can set the position of the satellites when you use a motor antenna for efficient channel search.
> Settings > Installation
1Press the RED button and select Motor Antenna. Select OK to save and exit.
2Select Search Channels and press the OK button.
3 Select Motor Setting and press the OK button to set the motor type and location.
Motor Type:
DiSEqC1.2: General motor antenna using DiSEqC 1.2.
USALS: Motor antenna using USALS.
My Longitude: Enter the longitude and direction.
Direction: Select East or West.
My Latitude: Enter the latitude and direction.
Direction: Select North or South.
LNB Frequency: Enter the LNB frequency.
Select OK.
Note: When Motor Type is set to DiSEqC 1.2, both My Longitude and My Latitude are inactivated.
4Select Position Setting and press the OK button to set the antenna position for the selected satellites.
Satellite: Select the satellite.
Transponder: Select the transponder.
Motor Driving: Continuous – Step - Time
Driving Size: When motor driving is set to Step or Time, select one from1~127.
Go to Stored Position: Make the antenna turn toward the position of the selected satellite.
Fine-tune the position using the / button until the signal strength and quality reach the maximum level.
Store Current Position: Save the adjusted position.
Recalculate: Recalculates the positions of all satellites based on the position of current satellite.
Press the BACK button to save and return.
Note: When Motor Type is set to USALS, Motor Driving, Store Current Position and Recalculate are inactivated.
Search Channels [Motor Antenna]
MENU
1
2
3
Motor Setting
Antenna Type
OK
Cancel
Fixed Antenna
SCD Antenna
Motor Antenna
Select your antenna type.
Antenna Type
Settings Installation (Motor Antenna)
Search
Search Option
Transponder
-
Satellite
Motor Setting
Position Setting
Limit Setting
USALS
Settings
Installation (Motor Antenna) Search Channels
OK
Search
Cancel
Search Option
Motor Type
My Longitude
Direction
My Latitude
Direction
LNB Frequency
USALS
23.0E
East
36.5N
North
Universal
Settings Installation (Motor Antenna) Search Channels
4
Satellite
Transponder
Motor Driving
Driving Size
Optus C1/D3 (156.0E)
12722, H, 22000, 2/3
Continuous
1
..
Installation (Motor Antenna) Search Channels Position Setting
West
East
Strength
Quality
75%
80%
Go to Stored position
Store Current Position
Recalculate
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Humax HDR-1003S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Humax HDR-1003S in the language / languages: English as an attachment in your email.

The manual is 7,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info