604917
28
Zoom out
Zoom in
Previous page
1/40
Next page
AU28
Installation
Single Cable Distribution enables the delivery of broadcast programming over a single cable to multiple users
eliminating the numerous cables required to support other electronics devices.
If you are using more than one satellite receiver, set one receiver at a time and turn off the others while setting.
Refer to the satellite antenna manual for details.
> Settings > Installation
1 Press the RED button and select SCD Antenna. Select OK to save and exit.
2Select Search Channels and press the OK button.
3 Select SCD Setting and press the OK button to set the channel(band) and frequency for this receiver.
Tuner1: Select from Channel 1~8.
• Frequency: The frequency is set based on the channel of tuner1.
Select OK.
4Select a satellite figure and press the OK button.
Satellite: The satellite is xed.
LNB Frequency: Select the LNB frequency.
Test Transponder: Check the signal status of each transponder and select the one with the best quality.
Select OK.
5Select Transponder under the activated satellite figure and press the OK button.
Select a value in the transponder list.
6Repeat the two steps above to set more satellites.
7Select Search and press the OK button. The found channels will be listed.
8When the search is completed, the channel switches automatically to the most recently tuned channel.
Note:
• Select User Dene to enter the options directly.
• Select Stop and press the OK button to stop the channel search.
All channels will be deleted if you change the antenna type.
The default password is 1234. If you have forgotten your password, please contact HUMAX Australia Customer
Service.
Search Channels [SCD Antenna]
MENU
Satellite
LNB Frequency
LNB Power
22Khz Tone
Test Transponder
Optus C1/D3 (156.0E)
Universal
On
O
12722, H, 22000, 2/3
1
2
3
4
Antenna Type
OK
Cancel
Fixed Antenna
SCD Antenna
Motor Antenna
Select your antenna type.
Antenna Type
Settings Installation (SCD Antenna)
OK
Search
Search
SCD Setting
Cancel
Search Option
Search Option
Transponder
-
Position 1
Satellite
-
SCD Setting
Tuner 1
Frequency
Channel 1
1210
Channel 1
Settings
Installation (SCD Antenna) Search Channels
Settings Installation (SCD Antenna) Search Channels
Settings Installation (SCD Antenna) Search Channels
Satellite Setting
OK
Cancel
Search Option
Strength
Quality
75%
80%
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Humax HDR-1003S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Humax HDR-1003S in the language / languages: English as an attachment in your email.

The manual is 7,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info