Manual Humax DTR-T1010 - YouView (page 32 of 36) (English)

604915

32

Zoom out

Zoom in

Previous page

1/36

Next page

8. Extraneous objects

Do not insert anything through the openings in the box, where they

can touch dangerous voltage points or damage parts.

9. Replacement of parts

When replacement of parts is required, be sure the service technician

uses replacement parts speciﬁed by the manufacturer or those that

have the same characteristics as the original part. Unauthorised

substitution may result in additional damage to the unit.

10. Connection to the aerial

Disconnect the box from the mains before connecting or

disconnecting the cable from the aerial. Failure to do so can damage

the aerial.

11. Connection to the TV

Disconnect the box from the mains before connecting or

disconnecting the cable from the TV. Failure to do so can damage

the TV.

12. Location

a) Place the box indoors to avoid exposing it to lightning, rain or sun.

Do not place it near a radiator or heater.

b) We recommend the box has 10cm clearance from any other

appliances susceptible to electromagnetic inﬂuences, such as a TV or

a VCR.

c) Do not block the openings and do not place the box on a bed, sofa,

rug or other similar surface.

d) If you place the box on a rack or a bookcase, ensure there is

adequate ventilation and that you have followed the manufacturer’s

instructions for mounting.

e) Do not place the box on an unstable cart, stand, tripod, bracket

or table where it can fall. A falling box can cause serious injury, and

serious damage to the appliance.

Safety instructions and precautions

31

1

my humax has been conected to my t.v. but I dusted and must has disturbed some thing I get that it is all working but no sound or picture. Help please J.illinghast Submitted on 3-11-2022 at 12:07
Reply Report abuse
- I'd recommend you post this to the YouView Community Forum, where people will be able to help Answered on 3-11-2022 at 14:56
  Vote up Report abuse
Why does my jvc smart tv not receive the signal from my humax box ie no info on the tv screen I have used a hdmi connection cable also connected through the aerial . I have even tried a spliter for the aerial so I have one feed going into the humax and a separate one going to the tv so they both work independently still no sign from the humax box to the tv.Also they both have independent earth net connection cables to them. Is the tv blocking the signal do I need a EDID emulator between the humax and the tv? The main problem is no picture on the tv so I can't set the humax box up. Submitted on 26-11-2020 at 12:49
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Humax DTR-T1010 - YouView at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Humax DTR-T1010 - YouView in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info