565072

HUMANTECHNIK A-2468-0 Manual

10
Zoom out
Zoom in
Previous page
1/40
Next page
10 English
It is only necessary to set units to
other channels if you have several
different users operating units in the
same building. Set the required
channel by using a small screwdriver
to turn the channel selector switch,
which is located towards the top of
the battery compartment, to the
required channel number.
All transmitters and receivers must
be set to the same channel.
Fig. setting the correct radio channel.
3. Setting the microphone
The
RF baby cry transmitter
has a
built-in microphone which reacts to
the sounds made by your child. The
dial switch for setting the sensitivity
of the microphone is located on the
underside of the unit. Set the sensiti-
vity so the
RF baby cry transmitter
reliably reacts to the sounds made
by your child.
Dial switch is set to the anticlockwise
stop: Low microphone sensitivity.
Dial switch is set to the clockwise
stop: High micro phone sensitivity.
4. Positioning the unit
Switch on the unit and position it
close to your child. It is possible that
the transmit signal may be triggered
once when you switch on the unit.
5. External microphone (A-2971-0):
Simply plug the microphone cable
into the socket on the un derside of
the
RF baby cry transmitter
. The
microphone can now be placed very
near to the baby if the built-in micro-
phone is too far from the baby to pick
up the sound adequately.
Warning:
The additional microphone
and lead could prove a danger to a
baby or small child. Ensure that they
are well out of reach.
Person call button
Pressing the person call button on
the
RF baby cry transmitter
causes a
signal to be triggered on every recei-
ver which is set to the same radio
channel as the transmitter. This
makes it pos sible to call people who
are in different rooms. Also, this but-
ton can be used for checking the
system is functioning.
Mains operation
You can also operate your
RF baby
cry transmitter
via the plug-in power
supply unit. To connect the PSU, ins-
ert the connector on the end of the
PSU cable into the corresponding
socket on the left-hand side of the
device. Then plug the power supply
unit into the normal 230 V socket in
your house.
Funk_Babysender_1008:BA_Funk_Babysend_0507 08.10.2008 11:38 Se
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HUMANTECHNIK A-2468-0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HUMANTECHNIK A-2468-0 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info