565072
9
Zoom out
Zoom in
Previous page
1/40
Next page
English 9
This increases both the reliability and
the range of the system.
Setting up the system –
1. Inserting the battery
There is a battery compartment on
the back of the
RF baby cry transmit-
ter
. Open it by your thumb, with sli-
ding the cover of the battery com-
partment to the right of the receiver.
Connect a 9 V block battery to the
connector plug, place the battery
into the recess and close the recei ver
again. When the battery is connec-
ted, the receiving signals may be
triggered once.
2.
Setting the correct radio channel
A special digital transmission pro-
cess ensures that the radio signals
are picked up without errors. This
process also makes it possible to set
10 different radio channels.
When supplied from the factory, all
RF baby cry transmitters
are set to
channel 0.
Congratulations on buying your
RF
baby cry transmitter
. We hope that
you get many years of enjoyment out
of it. Please read the operating
instructions through carefully to be
able to start the unit correctly and to
familiarise yourself with all of the
systems features.
Standard components
Please check if all following compo-
nents are included:
-
lisa RF baby cry transmitter
- 9 V block battery
- 9 V plug-in PSU
- Stand
- Operating Instructions
- Warranty card
If any parts are missing, please
immediately contact your dealer or
the manufacturer directly.
Components not included
External microphone.
Functional principle
A signalling system consists of at
least one transmitter and one recei-
ver. The
RF baby cry transmitter
records the sounds a baby makes
via a microphone. It converts these
signals into radio pulses (868.35
MHz) and transmits them to the
receiver without the need of wires.
Special features
When a signal is detected, it is trans-
mitted for a total of 22 seconds.
Funk_Babysender_1008:BA_Funk_Babysend_0507 08.10.2008 11:38 Se
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HUMANTECHNIK A-2468-0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HUMANTECHNIK A-2468-0 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info