Manual HUMANTECHNIK A-2467.0 (page 10 of 40) (English, German, Dutch, French, Italian, Spanish)

565068

Zoom out

Zoom in

1/40

10 English

Please note:

A separate socket must be used for

the water alarm sensor.

This socket is marked with a double

wave.

Available accessories:

Alarm mat (A-2921-0)

Connect the plug from the alarm mat

directly into the socket in the RF

alarm transmitter (alarm accessories

socket). Place the alarm mat under

the doormat.

Alarm call button (A-2935-0)

Connect the plug from the alarm call

button directly into the socket in the

RF alarm transmitter (alarm accesso-

ries socket). The alarm signal is trig-

gered by pressing the button (e.g.

from the patient’s bed).

Water alarm sensor (A-2924-0)

Plug the water alarm sensor into the

socket of the transmitter marked with

a double wave. The water alarm sen-

sor is suitable for nearly all fluids.

Stick the sensor with the supplied

double-sided adhesive tape to the

wall so that the contacts touch the

floor. The signal is triggered as soon

as both contacts are wetted by the

fluid.

It is only necessary to set units to

other channels if you have several

different users operating units in the

same building.

Set the required channel by using a

small screwdriver to turn the channel

selector switch, which is located

towards the top of the battery com-

partment, to the required channel

number.

All transmitters and receivers must

be set to the same channel.

Fig. Setting the correct radio chan-

nel.

3. Installing the alarm accessories

Plug the alarm accessories into the

socket on the underside of the RF

alarm transmitter.

This socket is identified by a triangle

framing an exclamation mark:

Funk-Alarmsender_0514:BA_Funkalarmsender_0514.qxd 07.05.2014 15:26 Seite 10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HUMANTECHNIK A-2467.0 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HUMANTECHNIK A-2467.0 Manual

Product: