565068
9
Zoom out
Zoom in
Previous page
1/40
Next page
English 9
Congratulations on purchasing the
RF alar m transmitter. We hope it will
give you many years of reassuring
operation. Please read through these
operating instructions carefully.
They tell you how to set up the
system correctly and explain all the
system’s features to you.
Standard components
Please check if all following compo-
nents are included:
- lisa RF alarm transmitter
- 1 connection cable
- 9 V battery
- Operating instructions
- Warranty card
If any parts are missing, please
immediately contact your dealer or
the manufacturer directly.
Operating principle
A signalling system consists of at
least one transmitter and one recei-
ver. The RF alarm transmitter picks
up the signals from various alarm
sensors. It converts theses signals
into radio pulses (868.35 MHz) and
transmits them to the receiver without
the need for wires.
Special features
When a signal is detected, it is trans-
mitted for a total of 22 seconds. This
increases both the reliability and the
range of the system.
Setting up the system
1. Inserting the battery
There is a battery compartment on
the back of the RF alarm transmitter.
Open it by sliding the cover of the
battery compartment to the right of
the transmitter using your thumb.
Connect a 9 V block battery to the
connector plug, insert the battery into
the battery compartment and close
the device. When the battery is
connected, the receiving signals may
be triggered once.
2.
Setting the correct radio channel
A special digital transmission pro-
cess ensures that the radio signals
are picked up without errors. This
process also makes it possible to set
10 different radio channels.
When supplied from the factory, all
RF alarm transmitter are set to chan-
nel 0.
Funk-Alarmsender_0514:BA_Funkalarmsender_0514.qxd 07.05.2014 15:26 Seite 9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HUMANTECHNIK A-2467.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HUMANTECHNIK A-2467.0 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info