565095

HUMANTECHNIK A-2043-0 Manual

6
Zoom out
Zoom in
Previous page
1/50
Next page
6 English
Standard components
Please check if all listed items are included:
- introson
IR
- Transmitter and Receiver
- 12 V plug-in PSU
- Connection cable
- Operating Instructions
- Warranty card
If any parts are missing please immediately contact your dealer or the manufacturer directly.
Connecting the infrared transmitter
- Plug in the audio connection cable
1
that comes with the device into the “LINE IN” con-
nection jack of the transmitter and the other end into the connection jack of your sound
source (e.g. the TV).
Other connection adapters are available optionally: a 3.5-mm stereo cinch jack adapter
2
which can be connected to a headphone jack, or a SCART connector
3
, which can be
plugged into the SCART jack of the audio source (marked with AV).
If your sound source is not equipped with a headphone jack or any other connection op-
tions, then you can clip a microphone
4
onto the sound source. This microphone is then
plugged into the corresponding MIC jack on the transmitter. The microphone is sold se-
parately.
- Connect the power supply unit that comes with the device
5
to the transmitter using the
“DC12V” connection plug. Then plug the power supply unit itself into a 230V electrical
wall outlet.
-
Set the under-the-chin receiver into the charging tray of the transmitter without using any
excessive force
6
. A red LED will light up to indicate that the device is being charged up.
- Beforethedeviceisusedforthersttime,thereceiverwiththebuilt-inrechargeablebat-
tery should be charged for 24 hours.
Setting up or adjusting the transmitter
- Place the transmitter close to the sound source in a suitable position. There must be a
clear line of sight between the front of the transmitter (polished front surface
7
) and the
receiver
8
. The polished surface of the transmitter must be aimed at the front of the
transmitter.
Using the receiver
- Use the volume control
9
to initially set the receiver to a low volume to protect your hear-
ing. Turn the volume control in the direction of the “6” to increase the volume and in the
direction of the “0” to decrease the volume.
- Use the sliding switch
10
, on the rear side of the under-the-chin receiver to switch the
device “ON” or “OFF”. Make sure that the sound source connected is switched on and
adjust the volume on the receiver to a level that is comfortable for you.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HUMANTECHNIK A-2043-0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HUMANTECHNIK A-2043-0 in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info