Manual HUMANTECHNIK A-2032-0 (page 10 of 36) (English, German, Dutch, French, Italian, Spanish)

565121

Zoom out

Zoom in

1/36

10 English

transmitter. Lay the cable to the

door chime and attach the micropho-

ne to the door chime by peeling off

the paper circle to reveal the sticky

ring beneath.

For optimal operation of the trans-

mitter the sensitivity may be adju-

sted so that only the doorbell activa-

tes the transmitter and not bak-

kground noise.

Setting the sensitivity

1. Set the sensitivity controller to its

lowest level (turn to the anticlockwi-

se to stop)

2. Activate the doorbell and gradual-

ly increase the sensitivity of the

transmitter (by turning the dial clok-

kwise) until the transmitter reacts to

the doorbell.

3. If your intercom system operates

with different signal tones, make

sure that both signal tones are relia-

bly detected.

Telephone connection

Plug the microphone cable into the

socket marked at the underside of

the transmitter. Lay the cable to the

telephone. Peel off the paper circle

on the microphone to reveal the

sticky ring beneath. Attach the

microphone to the area of the tele-

phone where the ringer is situated.

Adjust the volume of the ringer so

that the transmitter reacts to the

ringing.

Note: If the telephone handset is

replaced too harshly it may activate

the telephone transmitter.

Important note

All lisa devices connected to the

mains supply have a low power con-

sumption which may lead to the

device feeling warm. This is normal

and does not interfere with the nor-

mal function of the devices.

These signalling systems have a

high operational safety. Should any

faults occur in spite of proper instal-

lation and use, please contact your

dealer.

High and low voltage spikes (e.g.

during a thunderstorm) can occur on

the mains supply. The lisa devices

have an integrated electronic con-

troller which may stop working after

these conditions. If this happens

simply unplug each of the devices

and plug them in again.

As a precaution remove all devi-

ces from their sockets during a

thunderstorm.

The use of halogen lamps or other

equipment (e.g. Microwave Ovens)

may, in rare cases, interfere with

the lisa signals. In these cases the

use of mains filters or suppressors

is advisable. Please ask your dealer.

Maintenance and care

All lisa devices are maintenance

free. To clean, remove from their

mains sockets and wipe over with a

BA_Combi3_6spr_lisaKlein 09.04.2006 18:47 Uhr Seite 10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HUMANTECHNIK A-2032-0 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HUMANTECHNIK A-2032-0 Manual

Product: