Manual HUMANTECHNIK A-2032-0 (page 9 of 36) (English, German, Dutch, French, Italian, Spanish)

565121

Zoom out

Zoom in

1/36

English 9

Congratulations on purchasing the

lisa Combi III. We hope it will give

you many years of reassuring opera-

tion. Please read through these ope-

rating instructions carefully. They

tell you how to set up the system

correctly and explain all the syste-

m’s features to you.

lisa system introduction

An alerting system requires at least

one transmitter and a receiver. The

transmitter captures sound signals

and transforms them into digital sig-

nals that are passed to a receiver by

the existing mains electricity supply.

The receiver then transforms these

digital signals into light signals.

Channel selection

A digital transmission system ensu-

res the correct recognition of each

of the digital signals from each

transmitter. The system has 10 diffe-

rent selectable channels, 0-9. The

factory setting for all lisa devices is

channel 0. Only where more than

one installation is required in the

same building will it be necessary to

select a different channel for each

system.

To select a channel, turn the rotary

switch on the underside of the

transmitter to the required channel

number using a small screwdriver.

Example:

Set channel

number 0

Personal Call button

Pressing this button causes a cer-

tain flash sequence on each recei-

ver. It is possible to call people in

other rooms this way. This button

also allows the lisa system to be

tested without any connecting

cables.

Duration of flashing signals

The factory setting for the duration

of the flash is 28 seconds for all lisa

receivers. However, you can reduce

this to 8 seconds if you wish.

To change the flash duration for a

particular transmitter, remove the

transmitter from the mains socket

and, while pressing in the Personal

Call button, plug the transmitter

back into the socket. To switch back

to 28 seconds remove the transmit-

ter from the socket and plug back in

again this time without pressing the

Personal Call button.

Doorbell connection

Plug the transmitter into a conve-

nient mains socket. Plug the door-

bell microphone lead into the

respective socket at the back of the

BA_Combi3_6spr_lisaKlein 09.04.2006 18:47 Uhr Seite 9

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HUMANTECHNIK A-2032-0 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,93 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HUMANTECHNIK A-2032-0 Manual

Product: