10 English
Alarm transmitter operation
Plug the transmitter into a con-
venient mains socket and plug
the respective alarm accesso-
ries into the socket on the
underside of the transmitter.
Note:
A separate socket must be
used for the water alarm sen-
sor. This socket is identified
with a double wave symbol.
Available accessories (check
availability with your dealer):
Alarm mat (A-2921-0)
Plug the alarm mat into the
socket of the transmitter mar-
ked by a triangle framing an
exclamation mark. Place the
alarm mat under the doormat.
Alarm call button (A-2935-0)
Plug the alarm call button into
the socket of the transmitter
marked by a triangle framing an
exclamation mark. The alarm
signal is triggered by pressing
the button (e.g. from the
patient’s bed)
Water alarm sensor
(A-2924-0)
Plug the water alarm sensor
into the socket of the transmit-
ter marked with a double
wave. The water alarm sensor
is suitable for nearly all fluids.
Stick the sensor with the supp-
lied double-sided adhesive tape
to the wall so that the contacts
touch the floor. The signal is
triggered as soon as both con-
tacts are wetted by the fluid.
Mount-on contact (A-2922-0)
For connection to doors and
windows. The mount-on con-
tact consists of a permanent
magnet and a reed contact.
Plug the alarm call button into
the socket of the transmitter
marked by a triangle framing an
