565111
10
Zoom out
Zoom in
Previous page
1/32
Next page
10 English
Telephone connection
Plug the transmitter into a convenient
mains socket. Plug the end of the
cable with the transparent clip-in con-
nector (6-pin plug) into the socket at
the underside of the transmitter. Plug
the other end into the telephone sok-
ket. If the required telephone socket
is in use plug a 3-way telephone
adaptor into the socket and plug your
telephone into one of the sockets on
the adaptor.
Warning
Only use the supplied telephone
cable otherwise correct operation can
not be guaranteed. The telephone
transmitter galvanic is only designed
for connection to analogue systems. If
a connection is required to a digital
system (e.g. ISDN or part of a PBX
exchange system) please use a ISDN
telephone
transmitter, a telephone
transmitter acous tic, the Universal-lisa
or the lisa combi III.
Important note
All lisa devices connected to the
mains supply have a low power con-
sumption which may lead to the devi-
ce feeling warm. This is normal and
does not interfere with the normal
function of the devices.
These signalling systems have a high
operational safety. Should any faults
occur in spite of proper installation
and use, please contact your dealer.
High and low voltage spikes (e.g.
during a thunderstorm) can occur on
the mains supply. The lisa devices
have an integrated electronic control-
ler which may stop working after
these conditions. If this happens sim-
ply unplug each of the devices and
plug them in again.
As a precaution remove all devices
from their sockets during a thun-
derstorm.
The use of halogen lamps or other
equipment (e.g. Microwave Ovens)
may, in rare cases, interfere with the
lisa signals. In these cases the use of
mains filters or suppressors is advisa-
ble. Please ask your dealer.
Maintenance and care
All lisa devices are maintenance free.
To clean, remove from their mains
sockets and wipe over with a moiste-
ned cloth. Never use alcohol, thinner
or other organic materials. lisa devi-
ces should not be exposed to exces-
sive direct sunlight, heat, thick dust,
humidity or mechanical shock.
Note: This product is not protected
against splash water. Do not place
any container s filled with wa ter, such
as flower vases, or anything with an
open flame, such as a lit candle, on or
near the product.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HUMANTECHNIK A-2023-0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HUMANTECHNIK A-2023-0 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info