Manual HUMANTECHNIK A-2023-0 (page 9 of 32) (English, German, Dutch, French, Italian, Spanish)

565111

Zoom out

Zoom in

1/32

English 9

Congratulations on purchasing the

telephone transmitter galvanic. We

hope it will give you many years of

reassuring operation. Please read

through these operating instructions

carefully. They tell you how to set up

the system correctly and explain all

the system’s features to you.

Standard components

Please check if all following compo-

nents are included:

- telephone transmitter galvanic

- Operating Instructions

- Warranty card

system introduction

An alerting system requires at least

one transmitter and a receiver. The

transmitter captures sound signals

and transforms them into digital sig-

nals that are passed to a receiver by

the existing mains electricity supply.

The receiver then transforms these

digital signals into light signals.

Channel selection

A digital transmission system ensures

the correct recognition of each of the

digital signals from each transmitter.

The system has 10 different selec-

table channels, 0-9.

The factory setting for all lisa devices

is channel 0. Only where more than

one installation is required in the

same building will it be necessary to

select a different channel for each

system.

To select a channel, turn the rotary

switch on the underside of the trans-

mitter to the required channel number

using a small screwdriver.

Example:

Set channel

number 0

Personal Call button

Pressing this button causes a certain

flash sequence on each receiver. It is

possible to call people in other rooms

this way. This button also allows the

lisa system to be tested without any

connecting cables.

Duration of flashing signals

The factory setting for the duration of

the flash is 28 seconds for all lisa

receivers. However, you can reduce

this to 8 seconds if you wish.

To change the flash duration for a par-

ticular transmitter, remove the trans-

mitter from the mains socket and,

while pressing in the personal call

button, plug the transmitter back into

the socket. To switch back to 28

seconds remove the transmitter from

the socket and plug back in again this

time without pressing the personal

call button.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HUMANTECHNIK A-2023-0 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 0,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HUMANTECHNIK A-2023-0 Manual

Product: