500673

HTronic AL 600plus Manual

20
Zoom out
Zoom in
Previous page
1/40
Next page
20 AUTOMATIC CHARGER
7. DETAILED DESCRIPTION OF
THE CHARGING PROCEDURE
The „Mains“ (Netz) LED lights up after connecting to the electrical mains
(230V/50Hz). The device goes into the check mode after setting of the bat-
tery type by means of the slide switch and connecting a 2 V, 6 V or 12 V lead
battery (Acid, gel, AGM, EXIDE gel battery). The „Error“
(Fehler) LED as well
as the „Charging“
(Laden) LED flashes, if the voltage of a correctly connected
battery is higher than 14.3 V (for a 12 V battery) or more than 7.15 V in the
case of a 6 V battery or more than 2.4 V in the case of 2 V battery. The device
switches to the charging mode, if the voltage is in the range of 0.5…2.4 V (2 V
battery), 0.5…7.15 V (6 V battery) or 0.5…14.3 V (12 V battery).
Charging technology
The device has three different charging phases:
< I-Phase, the charging current is approx. 0.6 A for a 12 V battery and
approx. 0.3 A for a 2 V and 6 V battery.
< U1-Phase (= Main charging phase) with a constant voltage of 14.3 V
(and/or 2.4 V or 7.15 V)
< U2-Phase (Trickle charge) with constant voltage of 13.8 V
(and/or 2.3 V or 6.9 V).
The battery is first charged with a constant current (I-phase) until the final charge
voltage (14.3 V/7.15/2.4 V) has been reached. The voltage is then kept
constant (U1-Phase) and the charging current adapts itself to the charge state of
the battery. The fuller the battery, the lower the charging current. The charging
procedure is terminated and the battery charger switches automatically into the
test mode, if a charging current of approx. 100 mA is under run (see note N3).
The battery is loaded with a defined current during this test. A large internal
resistance and/or a strong sulphation of the battery is indicated, if the voltage
of the loaded battery thereby drops back to the rated voltage.
The battery charger evaluates the battery as „defective“, if the test is not passed;
the device then switches itself off and the „Error“
(Fehler) and „Finished“ (Fertig)
LED‘s flash.
The battery charger switches the „Finished“
(Fertig) LED on and goes into
the refresh mode, if all test criteria have been fulfilled after charging and the
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HTronic AL 600plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HTronic AL 600plus in the language / languages: German as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info