682196
6
Zoom out
Zoom in
Previous page
1/10
Next page
5
Charging Battery and Powering On/O
1. To charge, insert the Micro-USB Charging Cable into the HP
Sprocket 200.
2. Connect the Micro-USB Cable to a power source.
3. When connected, the Charge LED Indicator Light will turn on
to indicate charging. See "LED Indicator Lights: Charge and
Status" for more information.
4. To charge fully, allow the device to charge until the Charge
LED Indicator Light turns green.
5. Turn on the device by pressing the Power Button until the
Status LED Indicator Light illuminates and turns solid white
(default) or personalized color. The printer can also be
turned on by connecting the USB cable to power.
6. Turn o the device by pressing the Power Button until the
Status LED Indicator Light goes dark.
Continued use during charging will slow down the charging speed.
Connect the Micro-USB Cable to a power source capable of supplying 5Vdc/1A.
Caution:
Do not insert more than 1 pack of HP Sprocket Photo Paper (10 sheets plus the Print Quality Card) into the device at a time to avoid
paper jams or print errors.
Only use 2 x 3” (5 x 7.6 cm) HP Sprocket Photo Paper with the device to avoid paper jams and malfunctions. You can purchase
additional paper within the sprocket app by tapping “Buy Paper” in the Main Menu.
In the case of a paper jam, do not pull on the paper. Instead, turn the device o and on again to automatically eject the paper.
Do not pull the paper out of the device during printing.
If spills or moisture collect on a photo, wipe it away as soon as possible to prevent color damage.
Keep photo paper clean and free of bends or damage for best print quality.
Pairing a Mobile Device and the HP Sprocket 200
Pair quickly and easily with your HP Sprocket 200 using the in-app setup instructions. On rst launch of the sprocket
app, select “Setup”. The in-app instructions will help you easily pair with your mobile device within the app. You can
also access the setup instructions anytime from the Help & How To menu. When successfully connected, a green dot
will appear by “sprocket” in the Main Menu.
You can also pair in your operating system menu, as a backup.
For Android™
1. Press and hold the Power Button until the Status LED Indicator Light turns white when fully powered on.
2. Be sure Bluetooth is turned on for your mobile device or tablet and then open the sprocket app. Select the Main Menu in the
upper left-hand corner.
3. Tap sprocket and then Printers to pair your printer with your mobile device or tablet. A pop up message will direct you to Android™
Settings to pair your printer. Select the printer from the list of available devices.
For iPhone®
1. Press and hold the Power Button for 3 seconds to turn on the printer. The Status LED Indicator Light will turn white once fully
powered on.
2. Open iPhone® Settings and select Bluetooth. Turn Bluetooth on and then select the printer from the listed devices.
3. Next, launch the sprocket app.
• A reminder message will appear if you try to print a photo and are not paired with your printer.
• If your mobile device and printer will not pair, try reseting the printer.
Check out the HP Sprocket app user guide to learn more how to use the sprocket app
and all the fun features available for your printer!
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Sprocket 200 serie at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Sprocket 200 serie in the language / languages: English as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Sprocket 200 serie

HP Sprocket 200 serie Additional guide - English - 14 pages

HP Sprocket 200 serie Additional guide - German - 14 pages

HP Sprocket 200 serie User Manual - German - 10 pages

HP Sprocket 200 serie Additional guide - Dutch - 14 pages

HP Sprocket 200 serie User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info