212467
21
Zoom out
Zoom in
Previous page
1/30
Next page
The bulb in the adapter might not be working. Press the Scan button ( ),
and then select Slides or Negatives and look for illumination. If the bulb is
broken, service is required. See Customer support.
The adapter has a short warm-up mode. Wait a few seconds to see if the
light turns on. For the best scanning quality, let the adapter light warm up for
at least 30 seconds.
Resolve issues with slides or negatives
Use this section to help resolve issues with 35 mm slides or 35 mm negatives
scanned from the transparent materials adapter (TMA).
The image cannot be enlarged
You might have selected Zoom in instead of Resize. Zoom in changes only the
view on the screen. Use Resize to change the size of the scanned image. For
more information, see the HP Image Zone software Help.
Incorrect colors print, or the image is too light or dark
A final scan area might not have been selected. The software might be setting
the exposure for the entire area instead of the final scan area. Select and drag
the handles around the selection area you want for the final scan area.
The settings for transparent materials are reversed. Select Slides from TMA
for slides or Negatives from TMA for negatives.
Ensure that the TMA windows are not blocked or dirty.
The scanned image shows a colored tint, usually pink
The image was probably scanned without using the adapter. To review the steps
for scanning 35 mm slides or negatives, see Scan slides and negatives.
Dots or streaks appear in the scanned image
Check the original slide or negative for damage or debris.
Clean the scanner glass.
Clean the adapter windows using a slightly damp, soft cloth.
Scanned images are dark
Check to see if the adapter light is on before you click Scan or Accept.
The bulb in the adapter might be broken or not working. If the bulb is broken,
service is required.
Scanned image is black even though the adapter light is on
From the Basic menu in the HP Image Zone software, click Lighten/Darken.
Ensure that the adapter windows are not blocked or dirty.
Troubleshooting
User's Manual 17
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP scanjet 3770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP scanjet 3770 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info