214353
31
Zoom out
Zoom in
Previous page
1/42
Next page
31
Troubleshooting (continued)
If you are using an Apple PowerBook
TM
:
In Control Panels, open the PowerBook Display to select Video Mirroring
“On.”
Problem: Image is unstable or flickering
Activate the “Auto Image” function.
Adjust the “Tracking” variable in the “Computer Image” tab of the On
Screen Display (OSD). Refer to page 25.
Change the color settings of the computer’s monitor (see page 27).
Problem: Image has vertical flickering bar
Activate the “Auto Image” function.
Adjust the “Frequency” variable in the “Computer Image” tab of the OSD
(refer to page 25).
Check and re-configure the display mode of your graphic card to make it
compatible with the product (refer to pages 25, 35 and 37).
Problem: Image is out of focus
Focus the image with the projector’s Focus Ring.
Make sure the projection screen is located approximately 1.0 m
(3.3 feet)~12 m (39.4 feet) from the projector.
Problem: The image is stretched when displaying 16:9 DVD.
The projector will automatically detect a 16:9 DVD source signal and
adjust the aspect ratio to produce a full, 4:3-aspect-ratio screen display.
If the projected image is distorted, adjust the aspect ratio by doing the
following:
Select 4:3 aspect ratio type on your DVD player if you are playing a
16:9 DVD.
If you cannot select 4:3 aspect ratio type on your DVD player, select 4:3
for the “Aspect Ratio” variable in the “All Images” tab of the OSD (refer to
page 23).
Problem: Image is reversed
Change the “Projection Direction” parameter in the “Management” tab of
the OSD (refer to page 26).
Problem: Burned out Lamp
When the lamp module burns out it may make a loud popping sound. The
projector will not turn back on until the lamp module has been replaced.
Follow the lamp change procedure presented in this manual (page 30) and
included with the replacement lamp.
Remember to reset the “Lamp Hour” counter from the On Screen Display
(OSD) “Management” menu tab after replacing the lamp (refer to
page 26).
appendices
x
b31 sb21
NOTE: Some notebook
computers running
NT 4.0 have difficulty
sending a signal to an
external display.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP sb 21 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP sb 21 in the language / languages: English as an attachment in your email.

The manual is 7,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info