Manual HP PSC 2410 Photosmart (page 156 of 166) (English)

617385

156

Zoom out

Zoom in

1/166

hp psc 2400 series

chapter 15

146

troubleshooting

I have difficulties

when sending faxes

and when receiving

faxes

(continued)

• Using a telephone line splitter might cause faxing problems. Try

removing the splitter and connecting the HP PSC directly to the

telephone wall jack.

• Check that the telephone wall jack has a working telephone line by

plugging in a phone and checking for a dial tone.

• Telephone lines with poor sound quality (noise) can cause faxing

problems. Check the sound quality of the telephone line by

plugging a phone into the wall jack and listening for static or other

noise. If you hear noise, turn off the Error Correction Mode (ECM)

feature on your HP PSC and try faxing again. For information, see

use error correction mode (ECM) on page 68. Also contact your

phone company to report the noise problem on your line.

• Other equipment using the same telephone line as the HP PSC

might be in use. For example, you cannot use your HP PSC for

faxing if an extension phone is off-hook, or if you are using your

PC modem to e-mail or access the Internet.

• If you are using a digital subscribe line (DSL), make sure that you

have a DSL filter connected or you will not be able to fax

successfully. Obtain a DSL filter from your DSL provider. The DSL

filter removes the digital signal that blocks your HP PSC from

communicating properly with the telephone line. For information

on how to connect the DSL filter, see faxing from a DSL line on

page 130.

• Check for error messages on the front panel of your HP PSC. Until

a product error condition is resolved, you will not be able to send

or receive faxes. For information on resolving error conditions, see

the Error Messages section of the hp psc 2400/2500 series

troubleshooting section in the onscreen hp photo & imaging help.

• If you are using either a PBX or an ISDN converter, make sure the

HP PSC is connected to the port that is designated for fax and

phone use.

Note that some ISDN systems allow you to configure the ports for

specific phone equipment; for example, you might have assigned

one port for telephone and Group 3 fax and another for multiple

purposes. If you continue to have problems when connected to the

fax/phone port, try using the port designated for multiple purposes

(might be labeled “multi-combi” or something similar).

I cannot receive

faxes, but I can send

faxes

• The Rings to Answer feature might not be set to answer after the

appropriate number of rings for your office setup. For more

information, see how to choose the right fax setup for your office

on page 116.

• If you have a voicemail service at the same phone number you use

for fax calls, you must receive faxes manually, not automatically.

For information on setting up for faxing when you have a voicemail

service, see fax setup on page 115. For information on how to

receive faxes manually, see set up your hp psc to answer fax calls

manually on page 60.

problem possible cause and solution

in the HP psc 2410 photosmart printer, how is the font print contrast adjusted Submitted on 31-12-2022 at 17:58
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HP PSC 2410 Photosmart in the language / languages: English as an attachment in your email.

The manual is 6,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP PSC 2410 Photosmart

HP PSC 2410 Photosmart User Manual - German - 180 pages

HP PSC 2410 Photosmart User Manual - Dutch - 182 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HP PSC 2410 Photosmart Manual

Product: