617385
155
Zoom out
Zoom in
Previous page
1/166
Next page
reference guide
troubleshooting information
145
troubleshooting
For additional information on solving problems you might encounter while
faxing with your HP PSC, see the hp psc 2400/2500 series troubleshooting
section in the onscreen hp photo & imaging help.
problem possible cause and solution
I have difficulties
when sending faxes
and when receiving
faxes
Make sure you connected the HP PSC from the port labeled
“1-LINE” to your telephone wall jack using the phone cord
supplied in the box with your HP PSC.* This special 2-wire cord is
different from the more common 4-wire cords you might already
have in your office. Check the end of the cord and compare it to
the two types of cords shown below:
If you used the 4-wire cord, disconnect it, find the supplied 2-wire
cord, and then connect the 2-wire cord to the HP PSC (at the port
labeled “1-LINE”). For more information on how to connect this
cord, refer to fax setup on page 115.
* This possible cause/solution applies only in the countries/regions that
receive a 2-wire phone cord in the box with the
HP PSC, including:
Argentina, Australia, Brazil, Canada, Chile, China, Colombia, Greece,
India, Indonesia, Ireland, Japan, Korea, Latin America, Malaysia, Mexico,
Philippines, Poland, Portugal, Russia, Saudi Arabia, Singapore, Spain,
Taiwan, Thailand, USA, Venezuela, and Vietnam.
Note: If the 2-wire cord is not long enough and you need to extend
it, you might want to purchase a telephone cord extension
connector. Attach the 2-wire cord from the HP PSC to one end of the
extension connector, and then attach a 4-wire cord from the other
end of the connector to the telephone wall jack.
Make sure you have correctly connected the HP PSC to the
telephone wall jack, and correctly connected any additional
equipment and services that share the phone line with your
HP PSC.
Use the 1-LINE port on the back of the HP PSC to connect to the
wall jack, and use the 2-EXT port to connect any other equipment,
such as a PC modem or an answering machine. For more
information and connection diagrams, see fax setup on page 115.
2-wire cord
End view of the 2-wire phone
cord supplied in the box with
your HP PSC
4-wire cord
End view of a 4-wire phone cord
that might cause faxing problems
if connected directly to your
HP PSC
155


Need help? Post your question in this forum.

Forumrules
1

Forum

hp-psc-2410-photosmart

Reset search

  • in the HP psc 2410 photosmart printer, how is the font print contrast adjusted Submitted on 31-12-2022 at 17:58

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP PSC 2410 Photosmart at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP PSC 2410 Photosmart in the language / languages: English as an attachment in your email.

The manual is 6,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP PSC 2410 Photosmart

HP PSC 2410 Photosmart User Manual - German - 180 pages

HP PSC 2410 Photosmart User Manual - Dutch - 182 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info