724182
178
Zoom out
Zoom in
Previous page
1/216
Next page
Try connecting a working phone and phone cord to the telephone wall jack that you are using for the
printer and check for a dial tone. If you do not hear a dial tone, call your local telephone company for
service.
Other equipment, which uses the same phone line as the printer, might be in use. For example, you
cannot use the printer for faxing if an extension phone is o the hook, or if you are using a computer
dial-up modem to send an email or access the Internet.
Check to see if another process has caused an error. Check the display or your computer for an error
message providing information about the problem and how to solve it. If there is an error, the printer
cannot send or receive a fax until the error condition is resolved.
The phone line connection might be noisy. Phone lines with poor sound quality (noise) can cause faxing
problems. Check the sound quality of the phone line by plugging a phone into the telephone wall jack
and listening for static or other noise. If you hear noise, turn Error Correction Mode (ECM) o and try
faxing again. If the problem persists, contact your telephone company.
If you are using a digital subscriber line (DSL) service, make sure that you have a DSL lter connected or
you cannot fax successfully.
Make sure the printer is not connected to a telephone wall jack that is set up for digital phones. To check
if your phone line is digital, connect a regular analog phone to the line and listen for a dial tone. If you do
not hear a normal sounding dial tone, it might be a phone line set up for digital phones.
If you are using either a private branch exchange (PBX) or an integrated services digital network (ISDN)
converter/terminal adapter, make sure the printer is connected to the correct port and the terminal
adapter is set to the correct switch type for your country/region, if possible.
If the printer shares the same phone line with a DSL service, the DSL modem might not be grounded
correctly. If the DSL modem is not grounded correctly, it can create noise on the phone line. Phone lines
with poor sound quality (noise) can cause faxing problems. You can check the sound quality of the
phone line by plugging a phone into the telephone wall jack and listening for static or other noise. If you
hear noise, turn o your DSL modem and completely remove power for at least 15 minutes. Turn the
DSL modem back on and listen to the dial tone again.
NOTE: You might notice static on the phone line again in the future. If the printer stops sending and
receiving faxes, repeat this process.
If the phone line is still noisy, contact your telephone company. For information on turning your DSL
modem o, contact your DSL provider for support.
If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord connector that
plugs into a telephone wall jack.) Try removing the splitter and connecting the printer directly to the
telephone wall jack.
The printer cannot receive faxes, but can send faxes
If you are not using a distinctive ring service, check to make sure that the Distinctive Ring feature on the
printer is set to All Standard Rings .
If Auto Answer is set to O , you need to receive faxes manually; otherwise, the printer cannot receive
the fax.
If you have a voice mail service at the same phone number you use for fax calls, you must receive faxes
manually, not automatically. This means that you must be available to respond in person to incoming
fax calls.
172 Chapter 9 Solve a problem ENWW
178


Need help? Post your question in this forum.

Forumrules
1

Forum

hp-officejet-pro-9010-series

Reset search

  • Every time scam or junk calls my fax number, as soon as they hear the fax machine emit its tone They hang up The problem is that every time they do that, my machines types up a report and at the end says, NO FAX.
    That’s very obvious but I’m end a with a pile of useless paper and now the ink is very low from doing it. I would like to stop the Report that it useless and only use them when it is a ligimit fax report. I have an HP office jet 9010 All in one Submitted on 16-5-2022 at 00:10

    Reply Report abuse
  • What is that behind the two covered ports/panels on the back of the printer? Submitted on 1-9-2021 at 17:18

    Reply Report abuse
  • What is behind the two covered ports/panels on the back of the printer? Submitted on 1-9-2021 at 17:14

    Reply Report abuse
  • Miten saan asetettua värikasetit? Yritän asettaa, mutta erittäin tiukka, ei mene paikoilleen. Submitted on 24-7-2021 at 14:44

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP OfficeJet Pro 9010 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP OfficeJet Pro 9010 series in the language / languages: English as an attachment in your email.

The manual is 3,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP OfficeJet Pro 9010 series

HP OfficeJet Pro 9010 series User Manual - German - 229 pages

HP OfficeJet Pro 9010 series User Manual - Dutch - 223 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info