584662
163
Zoom out
Zoom in
Previous page
1/268
Next page
listening for static or other noise. If you hear noise, turn off your DSL modem and completely
remove power for at least 15 minutes. Turn the DSL modem back on and listen to the dial tone
again.
NOTE: You might notice static on the phone line again in the future. If the printer stops sending
and receiving faxes, repeat this process.
If the phone line is still noisy, contact your telephone company. For information on turning your
DSL modem off, contact your DSL provider for support.
If you are using a phone splitter, this can cause faxing problems. (A splitter is a two-cord
connector that plugs into a telephone wall jack.) Try removing the splitter and connecting the
printer directly to the telephone wall jack.
The printer cannot receive faxes, but can send faxes
If you are not using a distinctive ring service, check to make sure that the Distinctive Ring
feature on the printer is set to All Rings. For more information, see
Change the answer ring
pattern for distinctive ring on page 78.
If Auto Answer is set to Off, you need to receive faxes manually; otherwise, the printer cannot
receive the fax. For information on receiving faxes manually, see
Receive a fax manually
on page 67.
If you have a voice mail service at the same phone number you use for fax calls, you must
receive faxes manually, not automatically. This means that you must be available to respond in
person to incoming fax calls. Learn more about setting up the printer when you have a voice mail
service,
click here to go online for more information. For information on receiving faxes
manually, see
Receive a fax manually on page 67.
If you have a computer dial-up modem on the same phone line with the printer, check to make
sure that the software that came with your modem is not set to receive faxes automatically.
Modems that are set up to receive faxes automatically take over the phone line to receive all
incoming faxes, which prevents the printer from receiving fax calls.
If you have an answering machine on the same phone line with the printer, you might have one
of the following problems:
Your answering machine might not be set up correctly with the printer.
Your outgoing message might be too long or too loud to allow the printer to detect fax
tones, and the sending fax machine might disconnect.
Your answering machine might not have enough quiet time after your outgoing message to
allow the printer to detect fax tones. This problem is most common with digital answering
machines.
The following actions might help solve these problems:
When you have an answering machine on the same phone line you use for fax calls, try
connecting the answering machine directly to the printer,
click here to go online for more
information.
Make sure the printer is set to receive faxes automatically. For information on setting up the
printer to receive faxes automatically, see
Receive a fax on page 67.
Make sure the Rings to Answer setting is set to a greater number of rings than the
answering machine. For more information, see
Set the number of rings before answering
on page 78.
ENWW Solve fax problems 147
163


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Officejet Pro 8630 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Officejet Pro 8630 in the language / languages: English as an attachment in your email.

The manual is 8,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Officejet Pro 8630

HP Officejet Pro 8630 User Manual - German - 286 pages

HP Officejet Pro 8630 User Manual - Dutch - 276 pages

HP Officejet Pro 8630 Quick start guide - All languages - 120 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info