20204
22
Zoom out
Zoom in
Previous page
1/58
Next page
16 Using print media ENWW
Using overhead transparencies
Overhead transparency film must be designed specifically for use with laser printers.
Photocopy transparency film might not be compatible with laser printers because of higher
temperature and stiffness requirements. Color laser printers also require different film from
that used in monochrome printers to create proper color reproduction and accommodate
fusing needs.
Overhead transparency film is very smooth and must have a topcoat to provide the proper
electrical and toner adhesion properties. A transparency that is made of incompatible
material or that is too thin can easily melt in or wrap around the fuser and damage your
printer. The thickness requirement for monochrome overhead transparency film is
0.10 to 0.11 mm (4.0 to 4.4 mils) and for color overhead transparency film is
0.12 to 0.13 mm (4.8 to 5.2 mils).
Overhead transparency materials must be compatible with the heat and pressure of the
fusing process. Materials must not discolor, offset, or release undesirable emissions when
heated to 205° C (401° F) for 0.1 second (0.4 second for HP color LaserJet printers). See
your HP LaserJet printer user guide for detailed instructions about using overhead
transparencies.
See Ordering HP print media on page 35 for information about ordering
HP transparencies.
CAUTION Not all HP color LaserJet printers support printing on transparencies. Please see the
support documentation that came with your product to determine if your product supports
transparencies.
Guidelines for using overhead transparencies
The following table summarizes the overhead transparency specifications that provide the
best performance.
CAUTION To prevent jamming or poor-quality output, HP recommends using monochrome
transparencies with HP LaserJet monochrome printers and color transparencies with HP
color LaserJet printers.
Note The specifications listed in this section generally apply to all HP LaserJet printers; see the
support documentation that came with your printer for product-specific information.
Property Specifications
Caliper 0.12 mm to 0.13 mm (4.8 mils to 5.2 mils) for HP color LaserJet
printers.
0.10 mm to 0.11 mm (4.0 mils to 4.4 mils) for
HP monocrome LaserJet printers.
Electrical surface resistivity 10
10
to 10
13
ohms/square.
Fusing compatibility Overhead transparency materials must be compatible with the
heat and pressure of the fusing process. Materials must not
discolor, melt, offset, or release undesirable emissions when
heated to 205° C (401 ° F) for 0.1 second (0.4 second for
HP color LaserJet printers).
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4PLUS in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info