20204

HP LASERJET4PLUS Manual

19
Zoom out
Zoom in
Previous page
1/58
Next page
2 Guidelines for using media 13
Guidelines for using envelopes
The following table summarizes the envelope specifications that provide the best
performance. Envelopes should meet the specifications for paper unless otherwise
indicated.
Note The specifications listed in this section generally apply to all HP LaserJet printers. See the
support documentation that came with your printer for product-specific information.
Property Specifications
Basis weight 64 g/m
2
to 105 g/m
2
(17 lb to 28 lb).
See the support documentation that came with your printer for specific
information.
Caliper 0.09 mm to 0.14 mm (3.6 mil to 5.5 mil) for a single-layer thickness.
Surface roughness 100 to 200 Sheffield.
Fusing compatibility All inks, adhesives, and other materials that are used in the envelope
construction must be compatible with the heat and pressure of the
fusing process. Materials must not scorch, melt, ignite, offset
materials, or release undesirable emissions when heated to
205° C(401° F) for 0.1 second (0.2 second for HP color LaserJet
printers).
Dimensional accuracy and
construction quality
Envelopes must be folded within ±1 mm (±0.04 inch) of nominal size
and have no more than two thickness of paper anywhere along the
leading edge.
All folds must be sharply creased and construction must be tight (not
baggy) to avoid wrinkling.
Envelopes must not be stuck together from excess seam adhesive.
The envelope flap must lie flat (within 1.5 mm [0.059 inch] over the
width where the adhesive is applied).
Curl Envelopes must lie flat, with no more than 6 mm (0.25 inch) curl
across the entire surface.
Moisture content 4 percent to 6 percent by weight.
Grain Different types of envelope construction might require different grain
orientations for best performance, which is left to the discretion of the
converter. For more information, see the support documentation that
came with your printer.
Packaging Protective box to prevent edge damage and maintain flatness.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4PLUS in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info