20204
16
Zoom out
Zoom in
Previous page
1/58
Next page
10 Using print media ENWW
Property Specifications
Basis weight 64 g/m
2
to 105 g/m
2
(17 lb to 28 lb).
See the support documentation that came with your printer for specific
information.
Caliper 0.09 mm to 0.17 mm (3.5 mil to 6.5 mil).
See the support documentation that came with your printer for specific
information.
Minimum stiffness 1.2 minimum (Taber) machine direction.
0.8 minimum (Taber) cross direction.
Grain Portrait feeding: long grain up to 135 g/m
2
(36 lb);
short grain for weights greater than 135 g/m
2
.
Landscape feeding: long grain.
Electrical surface resistivity 10
9
to 10
13
ohms/square.
Electrical volume resistivity 10
9
to 10
14
ohms - cm.
Surface roughness 100 to 190 Sheffield optimal;
Up to 350 Sheffield extended (fusing or feeding performance can be
degraded at outer ranges).
Fusing compatibility Must not scorch, melt, ignite, offset materials, or release undesirable
emissions when heated to 205° C (401° F) for 0.1 second (0.2 second
for HP color LaserJet printers).
Furnish (composition) 100 percent chemical pulp and/or cotton content;
recycled paper with up to 5 percent groundwood can be used.
Dimensional accuracy Cut sheet within ±0.80 mm (±0.03 inch) of nominal.
Cut edge quality Cuts must be smooth and clean with no fray or edge roll.
Curl Must lie flat within 5 mm (0.2 inch).
Moisture content 4 percent to 6 percent by weight.
Packaging Moisture-proof ream wrap.
Wax pick 12 minimum (Dennison).
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4PLUS in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info