20204
15
Zoom out
Zoom in
Previous page
1/58
Next page
2 Guidelines for using media 9
The following guidelines should be considered when working with a knowledgeable vendor
to develop media that will have perforations or die-cuts:
So that edge trimmings will not scratch the photosensitive drum, punch cutouts and
perforations from the side to be printed.
Round all corners of a cutout to prevent snagging or, in the case of labels, peeling.
Ensure that die-cutting of labels does not penetrate the liner sheet.
Ensure that cutouts are not made at a position where paper-path sensors are located.
Some printers do not support printing closer than 10 mm (0.4 inch) to a cutout edge or
perforation in order to avoid toner contamination. For more information about your
printers specifications, see the support documentation that came with your printer.
All cuts should be clean (no burrs) and free of edge rollover to prevent nesting, poor
feeding, contamination, or wear on the printer.
Orient perforations in the direction of paper feeding to minimize tenting or feeding
problems from reduced stiffness.
Do not run perforations closer than 2 mm (0.08 inch) from the paper edge or 25 mm
(1 inch) from the leading edge, or jamming and feeding problems can result.
Guidelines for using paper
Use conventional white copier paper for most printing. The paper should be of high quality
and free of the following defects:
cuts
tears
grease spots
loose particles
dust
wrinkles and voids
curled or bent edges
CAUTION Avoid using extremely heavy or light paper. Use paper that is within your printers specified
basis-weight range, as shown in the support documentation that came with your printer.
The following table summarizes the guidelines that provide the best performance when
using paper.
Note The specifications that are listed in this table generally apply to all HP LaserJet printers.
See the support documentation that came with your printer for product-specific information.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4PLUS in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info