20200
123
Zoom out
Zoom in
Previous page
1/304
Next page
When the cartridge is low on toner or drum life
When the cartridge is low, the printer control panel shows the ORDER CARTRIDGE
message. For the HP LaserJet 4250 series, the message first appears when about 15%
(10,000-page cartridge) or about 8% (20,000-page cartridge) of the life remains in the print
cartridge. For the HP LaserJet 4350 series, the message first appears when about 25%
(10,000-page cartridge) or about 15% (20,000-page cartridge) of the life remains in the print
cartridge. This percentage is set with the intent of providing approximately 2 weeks of typical
use before the cartridge is depleted. You should have time to purchase a new cartridge
before the old cartridge is depleted.
The default is for the printer to continue printing until the cartridge runs out, but you might
prefer to have the printer stop instead of continuing when the ORDER CARTRIDGE
message first appears—for example, if you want print quality to remain consistently high
during print jobs, or if you do not want the cartridge to run out during a long print job. To
configure the printer to stop, in the CONFIGURE DEVICE menu, under SYSTEM SETUP,
set CARTRIDGE LOW to STOP. Then, when REPLACE CARTRIDGE appears, the printer
will stop printing. You can resume printing by pressing
(S
ELECT
button) for each print job.
When the cartridge is out of toner or drum life
The REPLACE CARTRIDGE message appears in one of these situations:
When the print cartridge is out of toner. If CARTRIDGE OUT is set to CONTINUE (in
the SYSTEM SETUP submenu of the CONFIGURE DEVICE menu), the printer
continues printing without interaction until the cartridge reaches the end of drum life. HP
does not guarantee print quality after the REPLACE CARTRIDGE message first
appears. Replace the print cartridge as soon as possible. (See
Ordering parts,
accessories, and supplies.) The REPLACE CARTRIDGE message remains until you
replace the print cartridge. If CARTRIDGE OUT is set to STOP, the printer stops printing
until you replace the print cartridge or resume printing by configuring the printer to
continue: In the CONFIGURE DEVICE menu, under SYSTEM SETUP, set CARTRIDGE
OUT to CONTINUE.
When the drum life of the print cartridge is out. You must replace the print cartridge
to continue printing. No override is possible, even if toner remains in the cartridge. (See
Ordering parts, accessories, and supplies.) This situation occurs to protect the printer.
ENWW Managing the print cartridge 111
123


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info