20200
58
Zoom out
Zoom in
Previous page
1/304
Next page
To print by type and size of paper
1. Be sure to load the trays correctly. See Loading trays.)
2. At the printer control panel, open the PAPER HANDLING menu. Select the paper type
for each tray. If you are unsure which type you are loading, such as bond or recycled,
check the label on the media package.
3. Select the paper-size settings at the printer control panel.
Tray 1: Set the paper size on the PAPER HANDLING menu if the printer is set to
TRAY 1 TYPE= a type other than ANY. If custom paper is loaded, also set the
custom-paper size on the PAPER HANDLING menu. For more information, see
Printing on small sizes, custom sizes, or heavy paper.
Tray 2 and optional 500-sheet trays: Standard paper sizes are automatically
detected if the media is loaded correctly in the tray and the guides are adjusted
correctly. See
Loading trays for information about tray adjustments. If custom paper
is loaded, set the knob in the tray to "Custom" and set the custom-paper size on the
PAPER HANDLING menu. For more information, see
Printing on small sizes,
custom sizes, or heavy paper.
Optional 1,500-sheet tray: Standard paper sizes are automatically detected if the
media is loaded in the tray correctly and the guides are adjusted correctly. See
Loading trays for information about tray adjustments. Custom-size media is not
supported.
Optional envelope feeder: Set the size on the PAPER HANDLING menu.
4. In the program or printer driver, select a type other than Auto Select.
NOTE
The type and size settings can also be configured in the HP Web Jetadmin software for
networked printers.
Manually feeding media from tray 1
The manual feed feature is another way of printing on special media from tray 1. Setting
MANUAL FEED to ON either in the printer driver or at the printer control panel stops the
printer after each job is sent, allowing you time to load special paper or other print media in
tray 1. Press
(S
ELECT
button) to continue printing.
If tray 1 contains media when you send the print job, and the printer control panel has
TRAY 1 TYPE=ANY and TRAY 1 SIZE=ANY as the default configuration for tray 1
operation, the printer will not stop and wait for media to be loaded. To have the printer wait,
set TRAY 1 TYPE and TRAY 1 SIZE to types other than ANY on the PAPER HANDLING
menu.
NOTE
If the SIZE and TYPE are set to ANY, and MANUAL FEED PROMPT is set to UNLESS
LOADED, then the media will be pulled from tray 1 without prompting. If MANUAL FEED
PROMPT is set to ALWAYS, then the printer will prompt you to load media, even if tray 1 is
set to TYPE=ANY and SIZE=ANY.
If you have selected MANUAL FEED=ON at the printer control panel, this setting will
override the printer driver, and all print jobs that you send to the printer will request manually
fed paper in tray 1 unless a specific tray has been selected in the printer driver. If this feature
is to be used only occasionally, it is best to set MANUAL FEED=OFF at the printer control
panel and to select the manual feed option in the printer driver on a job-by-job basis.
46 Chapter 2 Printing tasks ENWW
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info