20200
56
Zoom out
Zoom in
Previous page
1/304
Next page
Selecting which tray is used for printing
You can select how the printer pulls media from the trays. The following sections provide
information about configuring the printer to pull media from specific trays.
Understanding tray order
Customizing tray 1 operation
Printing by type and size of media (locking trays)
Manually feeding media from tray 1
Understanding tray order
When the printer receives a print job, it selects the tray by trying to match the requested
paper type and size with what has been loaded in the trays. Using an "autoselect" process, it
searches all available trays for the paper that satisfies the request, starting with the bottom
tray and ending with the top tray (tray 1). The printer begins printing the job as soon as it
finds the correct type and size.
NOTE
The "autoselect" process occurs only if no specific tray is requested for the job. If a specific
tray is requested, the job prints from the requested tray.
If media is loaded in tray 1 and tray 1 is set TRAY 1 TYPE=ANY and TRAY 1
SIZE=ANY on the PAPER HANDLING menu, the printer will always pull media from
tray 1 first. See
Customizing tray 1 operation for more information.
If the search fails, a message appears on the printer control-panel display requesting
that you load the correct media type and size. You can load that media type and size, or
you can override the request by selecting a different type and size at the printer control
panel.
If a tray runs out of media during a print job, the printer automatically switches to any
tray that contains the same media type and size.
The autoselect process changes somewhat if you customize tray 1 operation (as explained
in
Customizing tray 1 operation) or if you set tray 1 for manual feed (as explained in
Manually feeding media from tray 1).
Customizing tray 1 operation
The printer can be set to print from tray 1 if it is loaded, or to print only from tray 1 if the type
of media that is loaded is specifically requested. See
Paper Handling menu.
Setting Explanation
TRAY 1 TYPE=ANY
TRAY 1 SIZE=ANY
The printer usually pulls media from tray 1 first
unless it is empty or closed. If you do not keep
media in tray 1 all the time, or if you use tray 1
only to manually feed media, keep the default
setting of TRAY 1 TYPE=ANY and TRAY 1
SIZE=ANY on the Paper Handling menu.
44 Chapter 2 Printing tasks ENWW
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4350 in the language / languages: English as an attachment in your email.

The manual is 3,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info