20196
164
Zoom out
Zoom in
Previous page
1/218
Next page
162 Appendix A Control panel menus ENWW
System Setup submenu
Items on this menu affect printer behavior. Configure the printer according to your printing
needs.
The section that follows lists the settings and possible values. In the Values column, the default
value for each setting is the one with an asterisk (*) next to it.
Item Values Explanation
JOB STORAGE LIMIT 1 to 100 (*32) Specifies the number of quick copy jobs that can be
stored on the printer. This item appears only if an
optional hard disk accessory is installed.
JOB HELD TIMEOUT *OFF
1 HOUR
4 HOURS
1 DAY
1 WEEK
Sets the amount of time that held jobs are kept before
being automatically deleted from the queue.
TRAY BEHAVIOR There is no
value to select.
Determines how the printer responds to jobs that request
certain trays.
USE REQUESTED TRAY Exclusively
*First
Determines whether the printer tries to pull paper from a
different tray than the one you selected in the printer
driver.
EXCLUSIVELY: Sets the printer to pull paper only from the
tray you selected and not pull from another tray, even if
the tray you selected is empty.
FIRST: Sets the printer to pull from the tray you selected
first, but allows the printer to pull from another tray
automatically if the tray you selected is empty.
MANUAL FEED PROMPT Always
*Unless Loaded
Determines when the printer shows a prompt regarding
pulling from tray 1 if your print job does not match the
type or size loaded in any other tray.
ALWAYS: Select this option if you always want to be
prompted before the printer pulls from tray 1.
UNLESS LOADED: Prompts you only if tray 1 is empty.
POWERSAVE TIME 15 MINUTES
*30 MINUTES
60 MINUTES
90 MINUTES
2 HOURS
4 HOURS
Sets how long the printer remains idle before it enters
PowerSave mode.
PowerSave mode does the following:
minimizes the amount of power consumed by the
printer when it is idle
reduces wear on electronic components in the printer
(turns off the display backlight, but the display is still
readable)
The printer automatically comes out of PowerSave mode
when you send a print job, press a printer control panel
button, open a tray, or open the top cover.
To turn PowerSave mode on and off, see
POWERSAVE on page 166.)
PERSONALITY *AUTO
PS
PCL
Selects the default printer language (personality).
Possible values are determined by which valid
languages are installed in the printer.
Normally, you should not change the printer language. If
you change it to a specific printer language, the printer
will not switch automatically from one language to
another unless specific software commands are sent to
the printer.
164


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4300 in the language / languages: English as an attachment in your email.

The manual is 5,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP LASERJET4300

HP LASERJET4300 User Manual - Spanish - 222 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info