20196
163
Zoom out
Zoom in
Previous page
1/218
Next page
ENWW Configure Device menu 161
RET OFF
LIGHT
*MEDIUM
DARK
Use the Resolution Enhancement technology (REt)
setting to produce print with smooth angles, curves,
and edges.
REt does not affect print quality if the print resolution
is set to FastRes 1200. All other print resolutions
benefit from REt.
Note
It is best to change the REt setting in the program or
printer driver. (Program and printer driver settings
override control panel settings.)
ECONOMODE *OFF
ON
Turn EconoMode ON (to save toner) or OFF (for high
quality).
EconoMode creates draft-quality printing by reducing
the amount of toner on the printed page.
Note
It is best to turn EconoMode on or off in the program
or printer driver. (Program and printer driver settings
override control panel settings.)
CAUTION
HP does not recommend full-time use of EconoMode.
If EconoMode is used full-time, it is possible that the
toner supply will outlast the mechanical parts in the
print cartridge.
TONER DENSITY 1
2
*3
4
5
Lighten or darken the print on the page by setting the
toner density. Select a setting ranging from 1 (light) to
5 (dark). The default setting of 3 usually produces the
best results.
Note
It is best to change the toner density in the program
or printer driver. (Program and printer driver settings
override control panel settings.)
AUTO CLEANING *OFF
ON
Clean the fuser automatically using this feature.This
setting is unavailable if an optional duplexer is
installed. If a duplexer is installed, run the cleaning
page manually. (See CREATE CLEANING PAGE (below)
and Running the cleaning page manually on
page 89.)
CLEANING INTERVAL 1000
*2000
5000
10000
20000
If auto cleaning is on, set how often it runs. The
intervals correspond to the number of pages the
printer has printed. This setting is unavailable if an
optional duplexer is installed.
AUTO CLEANING SIZE Letter
A4
If auto cleaning is on, set the size of paper that the
printer should use when it is cleaning the printer
automatically. This setting is unavailable if an optional
duplexer is installed.
CREATE CLEANING PAGE There is no value
to select.
Press SELECT ( ) to print a cleaning page manually
(for cleaning toner from the fuser). Open the rear
output bin. Follow the instructions on the cleaning
page. For more information, see Running the
cleaning page manually on page 89.
PROCESS CLEANING PAGE There is no value
to select.
This item is available only after a cleaning page has
been created. Follow the instructions printed on the
cleaning page. The cleaning process might take up to
2.5 minutes.
Item Values Explanation
163


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4300 in the language / languages: English as an attachment in your email.

The manual is 5,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP LASERJET4300

HP LASERJET4300 User Manual - Spanish - 222 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info