20192

HP LASERJET4200 Manual

65
Zoom out
Zoom in
Previous page
1/218
Next page
ENWW Printing special paper 63
Setting custom paper sizes
When custom paper is loaded, size settings need to be selected in the program (the preferred
method), in the printer driver, or at the printer control panel. To reduce curl and other problems,
heavy paper and very small custom-size paper should be printed from tray 1 to the rear output
bin. (See “Printing to the rear output bin” on page 37.)
If the settings are not available in your program, set the custom paper size at the printer control
panel.
To set custom paper sizes
1 If you loaded a 500-sheet tray with custom paper, be sure that the knob is set to Custom.
(See “Loading tray 2 or an optional 500-sheet tray” on page 43.)
2 Press S
ELECT ( ) to open the menus.
3 Use U
P ARROW () or DOWN ARROW ( ) to scroll to PAPER HANDLING, and then press
S
ELECT ().
4 Use U
P ARROW () or DOWN ARROW ( ) to scroll to TRAY 1 SIZE or TRAY [N] SIZE (where
[N] is the number of the tray), and then press S
ELECT ().
5 Use U
P ARROW () or DOWN ARROW ( ) to scroll to CUSTOM, and then press SELECT ().
6 Use U
P ARROW () or DOWN ARROW ( ) to scroll to INCHES or MM (millimeters), and then
press S
ELECT ( ). This selects the measurement units for determining the size of your
custom paper.
7 Use U
P ARROW ( ), then DOWN ARROW ( ), and then press SELECT ( ) to set the
X dimension (the front edge of the paper, as shown in the figure above). The X dimension
can be 76 to 216 mm (3 to 8.5 inches).
8 Use U
P ARROW ( ), then DOWN ARROW ( ), and then press SELECT ( ) to set the
Y dimension (the side edge of the paper, as shown in the figure above). The Y dimension
can be 127 to 356 mm (5 to 14 inches). For example, if the custom paper is 203 by 254 mm,
set X=203 mm and Y=254 mm.
X (front edge)
Y (side edge)
Feed short
edge first
… 65 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4200 in the language / languages: English as an attachment in your email.

The manual is 5,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP LASERJET4200

HP LASERJET4200 User Manual - Spanish - 222 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info