20192

HP LASERJET4200 Manual

64
Zoom out
Zoom in
Previous page
1/218
Next page
62 2 Printing tasks ENWW
Printing small sizes, custom sizes, or heavy paper
Paper heavier than 120 g/m
2
(32 lb) should be printed only from tray 1. Custom-size paper can
be printed from tray 1, tray 2, or an optional 500-sheet tray.
Note The printer might print at a slower speed when printing small sizes, custom sizes, and heavy
paper.
For more information about paper with a special finish, such as laid or bond paper, see “Printing
on paper with a special finish” on page 61.
Weight and sizes
See below for specifications when printing on custom or heavy paper. For more information, see
“Paper specifications” on page 182.
Guidelines for heavy paper
Follow these guidelines when printing on heavy paper:
On the Paper Handling menu, set TRAY TYPE=ROUGH for the tray that you are using.
Some heavy paper requires that you also select a higher fuser mode to help prevent
unwanted toner from rubbing off onto the paper. At the printer control panel, open the
Configure Device menu. On the Print Quality submenu, select FUSER MODES, and then select
ROUGH=HIGH 2. The HIGH 2 setting might increase curl and jam problems.
To reduce curl and other problems, print heavy paper from tray 1 to the rear output bin. (See
“Printing to the rear output bin” on page 37.)
Guidelines for custom-size paper
Follow these guidelines when printing on any custom-size paper:
Feed short-edge first.
In your program, set page margins at least 4.23 mm (0.17 inch) away from the edges.
Set custom size in the program, in the printer driver, or at the printer control panel. Make
sure that you set the switch in the tray to Custom. (See “Setting custom paper sizes” on
page 63.)
Additional guidelines for small or narrow paper
Follow these additional guidelines when printing on small or narrow paper:
Do not attempt to print on paper smaller than 76 mm (3 inches) wide or 127 mm (5 inches)
long.
To reduce curl and other problems, print very small custom-size paper from tray 1 to the rear
output bin. (See “Printing to the rear output bin” on page 37.)
HP does not recommend printing large quantities of small or narrow paper. Printing large
quantities of small or narrow paper can cause toner to leak from the print cartridge and
damage the printer or cause print-quality problems.
Tray Minimum size Maximum size Supported weights
Tray1 76by 127mm
(3 by 5 inches)
216 by 356 mm
(8.5 by 14 inches)
60 to 200 g/m
2
(16to53 lb)
Tray 2 and optional
500-sheet tray
148 by 210 mm
(5.8 by 8.2 inches)
216 by 356 mm
(8.5 by 14 inches)
60 to 120 g/m
2
(16to32lb)
… 64 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP LASERJET4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP LASERJET4200 in the language / languages: English as an attachment in your email.

The manual is 5,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP LASERJET4200

HP LASERJET4200 User Manual - Spanish - 222 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info