23051

HP Laserjet 4050 T Manual

129
Zoom out
Zoom in
Previous page
1/260
Next page
EN
Chapter 4: Problem Solving 107
OUTPUT BIN FULL
CLEAR (BIN nnn)
nnn = (bin name)
The output bin is full and needs to be emptied.
PERFORM PRINTER
MAINTENANCE
To ensure optimum print quality, the printer prompts you to perform
routine maintenance every 200,000 pages. To order a Printer
Maintenance Kit, see page (page 11). (For more information see
page 87.)
RAM DISK DEVICE
FAILURE
The RAM disk had a critical failure and can no longer be used.
Turn the printer off, and then turn the printer on to clear the message.
RAM DISK FILE
OPERATION FAILED
The requested operation could not be performed. You might have
attempted an illegal operation, such as trying to download a file to a
non-existent directory.
RAM DISK FILE
SYSTEM IS FULL
Delete files and then try again, or turn the printer off, and then turn
the printer on to delete all files on the device. (Delete files using HP
Resource Manager or another software utility. See the software help
for more information.)
If the message persists, increase the size of the RAM disk. Change
the RAM disk size from the Configuration Menu in the printer’s control
panel (page B-14). HP Resource manager can also be used to
increase/decrease the RAM disk size.
TONER LOW
See page 80.
TRAY x EMPTY
Load the empty tray (
x
) to clear the message.
If you do not load the specified tray, the printer will continue printing
from the next available tray, and the message will continue to display.
TRAY x LOAD
[TYPE] [SIZE]
(or similar messages
requesting that you
load paper)
Load the requested paper into the specified tray (
x
). (See the sections
on loading paper, starting on page 34)
Make sure that the trays are correctly adjusted for size.The tray type
settings (and size for Tray 1) must be set from the printer’s control
panel (page 65).
Load the requested paper into an indicated tray, or press
[Select]
to
override the message and to print on a loaded paper size.
If printing does not continue, press
[Go]
.
If you are trying to print A4 or letter size paper and this message
appears, make sure the default paper size is set correctly from the
Printing Menu in the printer’s control panel.
Press
[Go]
to print from the next available tray.
Press
[- Value +]
to scroll through the available types and sizes.
Press
[Select]
to accept the alternate type or size.
UNABLE TO
MOPY JOB
Memory or file system failures would not allow a mopy job to occur.
Only one copy will be produced.
Printer Messages (Continued)
Message Explanation or Recommended Action
… 129 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Laserjet 4050 T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Laserjet 4050 T in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info