23051
127
Zoom out
Zoom in
Previous page
1/260
Next page
EN
Chapter 4: Problem Solving 105
EIO n DISK
INITIALIZING
The disk accessory card takes a long time to initialize. The first
parameter is the accessory slot number for this disk accessory card.
EIO n DISK
NOT FUNCTIONAL
The EIO disk is not working correctly.
Remove the EIO disk from the slot indicated.
Replace it with a new EIO disk.
EIO n
INITIALIZING
alternates with
DO NOT POWER OFF
Wait for the message to disappear (approximately 5 minutes). If the
printer EIO card is operating correctly and communicating with the
network, this message disappears after approximately one minute
and no action is required.
If the EIO card is unable to communicate with the network, this
message remains for five minutes and then disappears. In this case
the printer is not communicating with the network (even though the
message is no longer present). The problem may be a bad EIO card,
a bad cable or connection on the network, or a network problem.
Contact your network administrator.
EIO n DISK
SPINNING UP
The disk accessory is initializing. The first parameter is the accessory
slot number for this accessory card.
ENV FEEDER LOAD
[TYPE] [SIZE]
Load the requested envelope type and size into the envelope feeder.
Make sure the envelope size and type are set correctly from the Paper
Handling Menu in the printer’s control panel (page B-5).
Press
[Go]
if the desired envelope is already loaded in the feeder.
Press
[- Value +]
to scroll through the available types and sizes. Press
[Select]
to accept the alternate type or size.
EXTERNAL DEVICE
INITIALIZING
When an external paper handling device is connected to the printer,
it must initialize after the computer boots or after coming out of
PowerSave mode.
FLASH DEVICE
FAILURE
The flash DIMM had a critical failure and no longer can be used.
Remove the flash DIMM and replace it with a new one.
FLASH FILE
OPERATION FAILED
The requested operation could not be performed. You might have
attempted an illegal operation, such as trying to download a file to a
non-existent directory.
FLASH FILE
SYSTEM IS FULL
Delete files from the flash DIMM. Use HP Resource Manager to
download or delete files and fonts. (See the software help for more
information.)
FLASH IS
WRITE PROTECTED
The flash DIMM is protected and no new files can be written to it.
Disable the write protection through HP Resource Manager.
Printer Messages (Continued)
Message Explanation or Recommended Action
127


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Laserjet 4050 T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Laserjet 4050 T in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info