589815
175
Zoom out
Zoom in
Previous page
1/185
Next page
Why do I hear noises in the background during a phone call?
You might hear noises in the background if you use your iPAQ near electronic equipment, such as
microwave oven, speakers, or a television set. Avoid using your iPAQ near such items to prevent
an adverse effect on the voice quality.
If you are using a Bluetooth headset, ensure that you remain close enough to the phone. As you
move the headset farther from the phone, audio quality will degrade, and you may hear
background noise.
Ensure you have good network reception. If your device shows only one or two bars of coverage,
then you are more likely to experience frequent disconnects. If you are indoors, try moving closer
to the exterior of the building since some concrete buildings can significantly reduce cellular signal
strength. If you work around a lot of electronic equipment, try moving away from it, especially if
that equipment also produces radio signals.
Which factors degrade the GPS signal and affect accuracy?
You are indoors, underwater, or underground.
You are surrounded by tall buildings or cliffs.
You are inside a car with thermally shielded glass.
Synchronization
I cannot synchronize my iPAQ with my computer. What should I do?
Ensure you have downloaded and installed the latest synchronization software for your PC.
Windows Vista users should download Windows Mobile Device Center and Windows XP users
should download ActiveSync. Visit
http://www.windowsmobile.com/getstarted to download the
latest synchronization software for your PC.
Ensure your PC is set up to allow USB connections. If you are using ActiveSync, open ActiveSync
on your PC, and then click File > Connection Settings and ensure the Allow USB
Connections check box is selected. If you are using Windows Mobile Device Center, open
Windows Mobile Device Center on your PC, move the mouse pointer over Mobile Device
Settings, and then click Connection Settings. Ensure the Allow USB Connections check
box is selected.
My iPAQ was connected while I was installing Windows Mobile Device Center
(WMDC). Why does WMDC not launch even after installation?
In some cases after an upgrade, you need to disconnect and reconnect the iPAQ before WMDC can start.
Can I set up an active connection between my iPAQ and a computer using Bluetooth
for the first time?
No, the initial connection between your iPAQ and the computer needs to be created only through a
USB sync cable using ActiveSync for Windows XP and WMDC for Windows Vista. After this initial
connection, you will be able to set up Bluetooth for future connections.
Synchronization
163
175


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP iPAQ Glisten at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP iPAQ Glisten in the language / languages: English as an attachment in your email.

The manual is 8,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info