589814
147
Zoom out
Zoom in
Previous page
1/163
Next page
20 Frequently Asked Questions
I am having trouble turning on my HP iPAQ. What should
I do?
Your HP iPAQ seems to have problems with the battery. Please perform the following checks:
Is the battery charged? If the LED on your HP iPAQ is flashing red, it indicates a low battery
charge. For best results, charge the battery fully. The solid green LED display indicates full
battery charge.
Is the battery properly installed? Make sure the battery connectors on the battery are aligned
with the housing pins in the battery compartment. For more information, see
Step 2: Install the
battery and replace the battery cover on page 8.
Are the battery connectors on the battery and housing pins in the battery compartment clean?
If these appear to be soiled, contact your dealer to get them cleaned.
Try charging your battery using the AC adapter. For more information, see Step 3: Charge the
battery on page 9.
Perform a hard reset on your HP iPAQ by pressing and releasing the Reset button located at
the top of your HP iPAQ with the stylus.
I am unable to make or receive calls. How do I fix this?
If you have problems making or receiving calls, please perform the following checks:
Is the reception of the network signal good? You might be located within closed boundaries. If
yes, move to an open space or closer to a window. For more information, see
Check connection
and signal strength on page 22.
Is the network set up properly? If necessary, try to select your network manually. For more
information, see
View available phone networks on page 31.
Have you activated the Fixed Dialing, Call Forwarding, and Call Barring functions? If yes,
deactivate them temporarily.
Are you using two SIM cards, one with the Enable SIM PIN function activated and the other
with the Enable SIM PIN function deactivated? If yes, deactivate the Enable SIM PIN function
temporarily. For more information, see
Change the SIM PIN on page 28.
Is your HP iPAQ switched to the Flight mode? If yes, turn it off. For more information, see
Use
Wireless Manager on page 73.
I am having trouble turning on my HP iPAQ. What should I do? 135
147


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP iPAQ 900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP iPAQ 900 in the language / languages: English as an attachment in your email.

The manual is 15,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info