669388
48
Zoom out
Zoom in
Previous page
1/70
Next page
k. To clear the warning, press Enter.
l. To exit Advance, press the Esc key.
3. To disable SPD Write:
a. Select Chipset > PCH-IO Configuration, and then press the Enter key.
b. Select SPD Write Disable and press Enter.
c. To disable SPD write, select Enable and press Enter.
d. To exit Chipset, press the Esc key.
e. Select Save & Exit > Save Changes and Exit, and press Enter.
f. To save changes, select Yes. The server automatically reboots.
Embedded SATA RAID feature
The server ships with an embedded Intel Rapid Storage Technology SATA RAID Controller. The SATA
driver required for RAID configuration is embedded in the OS and will be installed along with the
installation of operating system or can be obtained from the Hewlett Packard Enterprise website.
For more information about the controller and its features, see Support for Intel Rapid Storage
Technology on the Intel website.
To configure arrays, see Setting Up and Configuring Intel AMT and RAID volumes on ProLiant ML10
Gen9 Server on the Hewlett Packard Enterprise website.
Intel Active Management Technology
This ProLiant server uses Intel AMT processor technology to simplify management and reduce IT-related
expenditures. Intel AMT processor technology allows for improved management of PC systems and
better security. AMT is a platform-resident solution that includes both hardware and firmware, and relies
on the Management Engine integrated into supported Intel chipsets. AMT provides out-of-band remote
access to a system regardless of the power state or operating system condition as long as the system is
connected to a power source and a network.
The server only supports Intel AMT when the supported Intel Xeon processor is installed in the system.
The server only supports the Intel Standard Manageability when the supported Intel Pentium or Core i3
processor is installed. The instructions for downloading the Intel AMT and Standard Manageability
software and firmware are available on the Hewlett Packard Enterprise website.
By default, AMT is inactive, and must be set up and configured in the MEBX before it can be used.
For more information, see Setting Up and Configuring Intel AMT and RAID volumes on ProLiant ML10
Gen9 Server on the Hewlett Packard Enterprise website. See the Intel website for other white papers
and technical information regarding AMT and Standard Manageability.
USB support
Hewlett Packard Enterprise servers support both USB 2.0 ports and USB 3.0 ports. Both types of ports
support installing all types of USB devices (USB 1.0, USB 2.0, and USB 3.0), but may run at lower
speeds in specific situations:
USB 3.0 capable devices operate at USB 2.0 speeds when installed in a USB 2.0 port.
When the server is configured for UEFI Boot Mode, it provides legacy USB support in the pre-boot
environment prior to the operating system loading for USB 1.0, USB 2.0 , and USB 3.0 speeds.
When the server is configured for Legacy BIOS Boot Mode, it provides legacy USB support in the pre-
boot environment prior to the operating system loading for USB 1.0 and USB 2.0 speeds. While USB
3.0 ports can be used with all devices in Legacy BIOS Boot Mode, they are not available at USB 3.0
speeds in the pre-boot environment. Standard USB support (USB support from within the operating
system) is provided by the OS through the appropriate USB device drivers. Support for USB 3.0 varies
by operating system.
48 Embedded SATA RAID feature
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Gen9 ML10 ProLiant H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Gen9 ML10 ProLiant H in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info