669388
47
Zoom out
Zoom in
Previous page
1/70
Next page
Software and configuration utilities
BIOS Setup Utility
Use the embedded BIOS setup utility to perform a wide range of configuration activities including:
Configuring system devices and installed options
Displaying system information
Selecting the primary boot controller
Configuring memory options
Boot options
Near the end of the boot process, the boot options screen is displayed. This screen is visible for several
seconds before the system attempts to boot from a supported boot device. During this time, you can do
the following:
Access BIOS Setup Utility by pressing the Esc/Delete key.
Access Boot screen by pressing the F7 key.
Force a PXE Network boot by pressing the F12 key.
Re-entering the server serial number and product ID
After replacing the system board, you must re-enter the server serial number and product ID.
Procedure
1. To enable SPD Write:
a. During the server startup sequence, press the Delete or Esc key to access the BIOS Setup menu.
b. Select Chipset > PCH-IO Configuration, and then press the Enter key.
c. Select SPD Write Disable and press Enter.
d. To enable SPD Write, select Disable and press Enter.
e. To exit Chipset, press the Esc key.
f. Select Save & Exit > Save Changes and Exit, and press Enter.
g. To save changes, select Yes. The server automatically reboots.
2. To enter the product ID:
a. During the server startup sequence, press the Delete or Esc key to access the BIOS Setup menu.
b. Select Advanced > System FRU Information, and then press the Enter key.
c. Select FRU update Support and press Enter.
d. Select Enable and press Enter.
e. Select Modify Product Part/Model Number and press Enter.
Enter the Modify Product Part/Model Number and press Enter.
f. Select Modify Product S/N and press Enter.
Enter the Modify Product S/N and press Enter.
g. Select Start Update FRU and press Enter.
h. Select Enable and press Enter. The following warning appears:
If you enable this item, the data will be written in FRU.
i. To clear the warning, press Enter. The following message appears:
FRU has been updated. Please reboot and check it.
j. To clear the message, press Enter. The following warning appears:
Please enable the setting of SPD Write Disable for security.
Software and configuration utilities 47
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Gen9 ML10 ProLiant H at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Gen9 ML10 ProLiant H in the language / languages: English as an attachment in your email.

The manual is 4,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info