655054
22
Zoom out
Zoom in
Previous page
1/30
Next page
NOTE: This feature is not available when S5 Maximum Power Savings is enabled.
This feature requires that Power On from Keyboard is set to “enable.”
When Power On from Keyboard or Power On from Cover Buttons is enabled, After Power Loss is changed to
Power On. This means that if the computer loses power, when the power comes back on, the computer
automatically turns on. The computer can then be shut down normally to restore the original power-on
setting.
If you encounter issues
There are several means to diagnose and resolve potential issues. HP provides several proprietary
diagnostics tools but recommends a sequential troubleshooting approach that addresses the most basic root
cause to the more complex. Steps include:
Visual inspection
Blink or beep codes
HP Support Assistant (HPSA) troubleshooter
HP PC Hardware Diagnostics
HP Support
System restore
System recovery
Performing basic troubleshooting
You can nd troubleshooting information in the comprehensive Maintenance and Service Guide (English only)
available under the reference library at http://www.hp.com/support. Select your country and language, select
Product Support & Troubleshooting, enter the model number of the computer, and click Search.
Visual inspection: No boot, no power, no video
If you encounter problems with the computer, monitor, or software, see the following list of general
suggestions before taking further action:
Check that the computer and monitor are plugged into a working electrical outlet.
Check to see that the computer is turned on and the power light is on.
Check to see that the monitor is turned on and the monitor light is on.
Turn up the brightness and contrast controls of the monitor if the monitor is dim.
If the system does not boot, press and hold any key. If the system beeps, then the keyboard is operating
correctly.
Check all cable connections for loose connections or incorrect connections.
Wake the computer by pressing any key on the keyboard or pressing the power button. If the system
remains in sleep mode, shut down the computer by pressing and holding the power button for at least
four seconds. Then press the power button again to restart the computer. If the system will not shut
down, unplug the power cord, wait a few seconds, and then plug it in again. The computer will restart if
automatic start on power loss is set in Computer Setup. If the computer does not restart, press the
power button.
Recongure your computer after installing a non-Plug and Play expansion board or other option.
16 Chapter 2 Getting Started in Windows 10
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Elite Slice at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Elite Slice in the language / languages: English as an attachment in your email.

The manual is 0,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Elite Slice

HP Elite Slice User Manual - English - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info