436321

HP designjet 8000s cutter blade kit Manual

206
Zoom out
Zoom in
Previous page
1/230
Next page
7. Print heater (fixes the ink on to the media).
8. Front heater (dries the ink and stabilizes the printed image).
WARNING! Do not touch heater surfaces in the media path. This may cause burns.
Heater temperature settings
Heater temperatures are preset automatically for the media type that is selected during media loading.
Under normal operating conditions you do not need to set the temperature.
Use the printer front panel only when you need to make fine adjustments to the heater temperature.
●
On/off setting: use theSHIFTkey when the heater is selected.
●
Heater selection: use the left key or right key to select the front (F), print (P) or Rear (R) heater.
●
Temperature setting: use the up key or down key to set the temperature for the selected heater.
●
You can turn the heater ON while the printer is not printing by pressing and holding the
<keyboard>OK</keyboard>key for 2 seconds.
●
You can turn the heater OFF while the printer is not printing by pressing and holding the CANCEL key
for 2 seconds.
●
Front panel display (when the heater is turned on):
●
Upper line: preset temperature for each heater
●
Lower line: current temperature for each heater
●
Front panel display (when the heater is turned off):
●
Upper line: OFF for each heater
●
Lower line: current temperature for each heater
A “+” sign indicates that the heater is warming up. The default temperature range is set between 15 °C and
55 °C.
Heater preset temperature by medium
The heater preset temperature for each media type is listed below. Preset the heater temperature according
to the media you use.
Medium Media type Front Print Rear Print mode
Glossy vinyl
chloride
Glossy 45°C 40°C 45°C 8 pass bi-
directional
196 Chapter 15 Tell me about… (heater topics) ENWW
Tell me about… (heater topics)
… 206 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP designjet 8000s cutter blade kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP designjet 8000s cutter blade kit in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info