436321

HP designjet 8000s cutter blade kit Manual

137
Zoom out
Zoom in
Previous page
1/230
Next page
Adjust heater and print mode settings
If you see banding in all colors and you have already performed media advance calibration, then you can
try adjusting the heater temperature and print mode settings.
Banding in all colors may be caused by the following factors:
●
Small print dot size: heat will cause a smaller dot size. The higher you set the heater temperature, the
smaller the dot size is which results in light banding.
●
Ink absorption by the media: if the media you are using is not capable of absorbing the ink as it is
placed, then this can result in dark banding.
To improve ink placement and absorption try the following:
●
Set a lower print heater temperature for light banding or a higher temperature for dark banding.
●
Change the print mode to reduce the quantity of ink placed on the media for dark banding.
●
Change the print mode from bidirectional printing to unidirectional printing for dark banding.
After each change to a setting, try printing the nozzle print pattern to check the image quality.
To change the heater temperature and print mode settings:
1. Press the ONLINE key and select the MEDIA REG menu with the
key.
2. Select PRINT HEATER T in the MEDIA REG menu with the and keys.
Parameters: 15 °C to 55 °C, or ** to turn the heater off.
NOTE This value will only be applied if the HEATER PREF option is set to HEAT
PANEL.
3. Select the number you want to change by using the and keys and change the numeric value using
the
and keys.
4. Press the OK key to confirm the parameter.
Print the nozzle print pattern to check the image quality.
5. To change the Print mode:
Select PRINT MODE. in the MEDIA REG menu with the
and keys.
ENWW Adjust heater and print mode settings 127
How do I get the best image
q
ualit
y
… 137 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP designjet 8000s cutter blade kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP designjet 8000s cutter blade kit in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info