Manual HP designjet 8000s cutter blade kit (page 135 of 230) (English)

436321

135

Zoom out

Zoom in

1/230

4. A. For each printhead line, identify the value where the reference printhead is aligned. In this example

image, for the Magenta line the correction value is 1 (indicated as A in the image).

To set printhead nozzle position adjustment values:

1. Select ADJUST and press the OK key.

2. Select NOZZLE POS VAL and press the OK key.

3. Select the printhead color to be adjusted, and press the OK key.

4. Insert the value and press OK key.

Select the number you want to change by using the

and keys and change the numeric value using

the

and keys.

Line sensor position adjustment

This test pattern is used only for HP Support purposes to calibrate the line sensor.

Back feed adjustment print

This option prints a pattern so that you can adjust how much back feed is applied to a media type that you

are loading.

1. Press the ONLINE key.

2. Press the key, and select BACK ADJ PRINT and the OK key.

Select the print mode you usually use for the media that you are calibrating.

Select the NORMAL media feed adjustment print if adjusting the high speed mode.

Select a parameter based on your print mode.

Parameters:

●

NORMAL — standard and high speed print modes (720 x 720 dpi – 8 passes).

●

H-QUAL — high quality print mode (720 x 720 dpi – 16 passes).

ENWW How do I calibrate my printer 125

How do I get the best image

ualit

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of HP designjet 8000s cutter blade kit in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

HP designjet 8000s cutter blade kit Manual

Product: