724473

HP Designjet 4020 Manual

192
Zoom out
Zoom in
Previous page
1/235
Next page
●
Your computer or printer “hangs” (stays idle) while communication is taking place.
●
Your printed output shows random or inexplicable errors (misplaced lines, partial graphics etc.)
To solve a communication problem:
●
Ensure that you have selected the correct printer in your software.
●
Ensure that the printer works correctly when printing from other software.
●
Remember that very large prints may take some time to receive, process and print.
●
If the printer is connected to a network, try using it when connected directly to your computer
through a FireWire or USB cable. See
Connect the printer on page 191.
●
If your printer is connected to your computer through any other intermediate devices, such as switch
boxes, buffer boxes, cable adapters, cable converters, etc., try using it when connected directly to
your computer.
●
Try another interface cable. See
Connect the printer on page 191.
●
Ensure that the graphic language setting is correct. See
Change the graphic language setting
on page 65.
I cannot access the Embedded Web Server from my
browser
If you have not done so already, please read Access the Embedded Web Server on page 17.
●
Have you set an administrator password for the Embedded Web Server on the Security page, and
then forgotten the password? If so, select the
icon, then Printer configuration > Resets >
Reset EWS password.
●
At the printer's front panel, select the
icon, then Printer configuration > Allow EWS > On.
●
Check that you have a TCP/IP (network or FireWire) connection to your printer. If you connect
directly to your printer with a USB cable, you cannot use the Embedded Web Server.
●
If you are using a FireWire connection, make sure that your computer's operating system supports
IP over IEEE-1394 (FireWire). For example, Windows XP and Windows 2003 Server support IP
over FireWire, but Windows 2000 does not. Make sure that your operating system is configured to
use IP over FireWire.
●
At the printer's front panel, check that IP is enabled for the type of connection you are using. Select
the
icon, then I/O setup, then the type of connection you are using, then View information,
and check that you see IP enabled. If not, you may need to use a different type of connection.
●
If you normally access the Web through a proxy server, try bypassing the proxy server and
accessing the Web server directly. You can do this by modifying your browser settings.
For instance, if you are using Internet Explorer 6 for Windows, go to Tools > Internet Options
> Connections > LAN Settings and check the 'Bypass proxy server for local addresses' box.
Alternatively, for more precise control, click the Advanced button and add the printer's IP address
to the list of Exceptions for which the proxy server is not used.
●
Try switching off the printer (with the Power key on the front panel) and then switching it on again.
182 Chapter 19 The problem is... (other topics) ENWW
Other problems
… 192 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Designjet 4020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Designjet 4020 in the language / languages: English as an attachment in your email.

The manual is 10,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Designjet 4020

HP Designjet 4020 User Manual - German - 234 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info