724473

HP Designjet 4020 Manual

175
Zoom out
Zoom in
Previous page
1/235
Next page
from these applications, the bottom of the image will be clipped. In this case, the only way to print the
whole image is to reduce the resolution so that the whole image requires fewer than 32,768 pixels. The
HP-GL/2 and HP RTL printer driver contains an option called Compatibility with 16-bit applications,
which can be used to reduce the resolution of such images automatically. You can find this option by
selecting the driver's Services tab, then the Troubleshoot Software Problems icon.
The image is in one portion of the printing area
●
Have you selected too small a page size in your application?
●
Does your application think that the image is in one portion of the page?
The image is unexpectedly rotated
At the front panel, select the icon, then Default printing options > Paper options > Rotate. Check
that the setting is what you wanted.
For non-PostScript files: if Nesting is On, pages may be automatically rotated to save paper. See
Rotate
an image on page 62.
The print is a mirror image of the original
At the front panel, select the icon, then Default printing options > Paper options > Enable mirror
image. Check that the setting is what you wanted.
The print is distorted or unintelligible
●
The interface cable connecting your printer to your network (or to your computer) could be faulty.
Try another cable.
●
If the front-panel graphic language setting is Automatic (the default), try the other settings:
PostScript for a PostScript file, HP-GL/2 for an HP-GL/2 and HP RTL file etc. (see
Change the
graphic language setting on page 65). Then send the file again.
●
Depending on the software, drivers and RIPs you are using with your printer, there will be different
ways of solving this problem. Refer to the vendor's user documentation for details.
One image overlays another on the same sheet
The I/O timeout setting may be too long. From the front panel, decrease the setting and print again.
Select the
icon, then I/O setup > Select I/O timeout.
Pen settings seem to have no effect
Here are some possible explanations:
●
You have changed the settings in the front panel by selecting the
icon followed by Default
printing options > HP-GL/2 options > Define palette, but you have forgotten to select that palette
in Default printing options > HP-GL/2 options > Select palette.
●
If you want the software-driven pen settings, you must remember to go to the front panel and select
the
icon followed by Default printing options > HP-GL/2 options > Select palette >
Software.
ENWW The image is in one portion of the printing area 165
Image errors
… 175 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Designjet 4020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Designjet 4020 in the language / languages: English as an attachment in your email.

The manual is 10,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Designjet 4020

HP Designjet 4020 User Manual - German - 234 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info