724472
211
Zoom out
Zoom in
Previous page
1/268
Next page
16
The problem is with the paper
“The problem is the paper cannot be loaded successfully” on page 209
“The problem is a paper jam (paper stuck in the printer)” on page 211
“The problem is prints do not stack properly in the bin” on page 213
“The problem is the printer uses a lot of paper to align the printheads” on page 213
The problem is the paper cannot be loaded
successfully
The paper may be loaded at an angle (skewed). Check that the right-hand edge
of the paper is aligned with the half-circle on the right-hand side of the platen and,
particularly in the case of sheet paper, that the leading edge is aligned with the
metal bar in the platen.
The paper may be crumpled or warped, or may have irregular edges.
Rolls
If the paper gets stuck in the paper path to the platen, it may be that the leading
edge of the paper is not straight or clean, and needs to be trimmed. Remove the
initial 2 cm (1 in) from the roll and try again. This may be necessary even with a
new roll of paper.
Check that the spindle is correctly inserted. The blue spindle lever on the right
should be in the horizontal position.
Check that the paper is correctly loaded on the spindle, and that it loads over the
roll towards you.
Check that the paper is wound tightly on the roll.
Sheets
Check that the leading edge of the sheet is aligned with the cutter channel in the
platen.
Do not use hand-cut sheets, which may be of irregular shapes. Use only
purchased sheets.
Here is a list of front panel messages related to paper loading, with the suggested
corrective action.
Front panel message
Suggested action
Right edge of roll too far
from load line.
The roll has not been loaded correctly, the right–
hand edge was not aligned with the half–circle on
the platen. Press the Select key to try to load the
roll again.
Right edge of sheet too
far from load line.
The sheet has not been loaded correctly, the right–
hand edge was not aligned with the half-circle on
the platen. Press the Select key to try to load the
sheet again.
209
The problem is with the paper
211


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Designjet 4000 P-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Designjet 4000 P-S in the language / languages: English as an attachment in your email.

The manual is 19,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Designjet 4000 P-S

HP Designjet 4000 P-S User Manual - German - 280 pages

HP Designjet 4000 P-S User Manual - Dutch - 394 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info