724472

HP Designjet 4000 P-S Manual

210
Zoom out
Zoom in
Previous page
1/268
Next page
The problem is an ink cartridge status message
These are the possible ink cartridge status messages:
● OK: the cartridge is working normally, with no known problems
● Missing: there is no cartridge present, or it is not properly connected to the printer
● Low: the ink level is low
● Very low: the ink level is very low
● Empty: the cartridge is empty
● Reseat: you are recommended to remove the cartridge and then reinsert it
● Replace: you are recommended to remove the cartridge and then reinsert it; if
that fails, replace the cartridge with a new cartridge
● Altered: there is something unexpected about the cartridge's status—perhaps it
has been refilled
The problem is a printhead status message
These are the possible printhead status messages:
● OK: the printhead is working normally, with no known problems
● Missing: there is no printhead present, or it is not properly installed in the printer
● Reseat: you are recommended to start the printhead removal process from the
front panel (see “How do I remove a printhead?” on page 106), but instead of
removing the printhead, just press the Select key on the front panel
● Replace: you are recommended to remove the printhead and then reinsert it; if
that fails, clean the electrical connections; if that fails, replace the printhead with a
new printhead
● Remove: the printhead is not a suitable type for use in printing (for instance, a
setup printhead)
The problem is a printhead cleaner status message
These are the possible printhead cleaner status messages:
● OK: the cleaner is working normally, with no known problems
● Missing: there is no cleaner present, or it is not properly installed in the printer
● Reseat cleaner: you are recommended to remove the cleaner and then reinsert it
● Wrong stall: the cleaner has been installed in the wrong place
● End of life: the cleaner has reached the end of its planned lifetime
● Not replaced with printhead: you have installed a new printhead without
installing the new cleaner that came with it
If a printhead cleaner needs to be removed or reseated, you must start the printhead
replacement process (see “How do I remove a printhead?” on page 106). Open the
window when prompted to do so by the front panel. If the front panel shows the
printheads with no printhead blinking, you do not need to touch the printheads. Just
close the window again, and the printer will proceed to printhead cleaner replacement.
Chapter 15
208
The problem is with the ink system
… 210 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for HP Designjet 4000 P-S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of HP Designjet 4000 P-S in the language / languages: English as an attachment in your email.

The manual is 19,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of HP Designjet 4000 P-S

HP Designjet 4000 P-S User Manual - German - 280 pages

HP Designjet 4000 P-S User Manual - Dutch - 394 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info