2
PROTECT YOUR WATER TIMER FROM FROST. REMOVE
FROM THE TAP IN WINTER. PRODUCT NOT
GUARANTEED AGAINST FROST DAMAGE. REMOVE
BATTERIES WHEN NOT IN USE.
PROBLEM
Valve opens and closes when
batteries are first inserted but then
fails to operate when dial is at ON
or OFF.
Valve works but no water flows.
Valve works on manual but no
automatic watering.
Knob points to ON but no
watering.
SOLUTION
Your AC+ has detected poor
batteries. Replace with new
ALKALINE batteries.
Check tap is turned on.
Set Auto Start time
Manual ON 60 minutes is finished.
Switch off or turn to desired
automatic watering time.
PROBLEM SOLVING
correct setting.
5. Turn dial to AUTO to start the selected programme.
Automatic OFF
Turn dial to ON or OFF.
If you wish to return to Automatic watering re-select AUTO.
Changing current time, start time, watering frequency or
duration
Turn dial to desired setting and press the relevant button as
instructed above.
NOTE: You do not need to reset all settings.
MANUAL OPERATION
Manual ON
Turn dial anti-clockwise to ON.
Water will flow for 60 minutes maximum or until turned to OFF
setting.
Note: After 60 minutes water shuts off. Knob will still point to ON
and needs to be manually set to OFF or to desired number of
automatic watering minutes.
Manual
OFF
Turn dial clockwise to OFF.
Note: Operation is only audible when valve opens and closes. To
check that timer is working, switch to manual ON or OFF to hear
valve operate.
CONNECTING THE TIMER TO THE TAP
Use supplied adaptors if required.